i386/74211: USB flash drive causes CAM status 0x4 on 4.10Release

[Alexei Tolkachev]

>Number:         74211
>Category:       i386
>Synopsis:       USB flash drive causes CAM status 0x4 on 4.10Release
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          change-request
>Submitter-Id:   current-users
>Arrival-Date:   Sun Nov 21 19:40:25 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator:     Alexei Tolkachev
>Release:        FreeBSD 4.10-RELEASE #3
>Organization:
RCS
>Environment:
FreeBSD g.com.ua 4.10-RELEASE FreeBSD 4.10-RELEASE #3: Fri Nov 5 07:42:15 EET 2004  root at .g.com.ua:/usr/src/sys/cmpile/KERN1 i386
>Description:
      Hello!

When I plug SUMSUNG USB Flash Drive I got following error messages:

(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry

dmesg showed this (about USB):

uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6300-0x631f 
irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Samsung Electronics USB DRIVE, rev 1.10/0.50, addr 2

# usbdevs -d -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
uhub0
port 1 addr 2: full speed, power 500 mA, config 1, USB DRIVE(0x0110), Samsung Electronics(0x04e8), rev 0.50
umass0
port 2 powered

In my kernel pluged all necessary USB devices (i seem`s...):

device uhci
device ohci
device usb
device ugen
device uhid
device umass

device scbus
device da
device pass

Best regards!
Alexei Tolkachev, Ukraine. 21.11.04

P.S. It`s my first PR, and Im really sorry if I do something wrong 
in this message.
>How-To-Repeat:
      Plug SUMSUNG USB Flash Drive to the computer with FreeBSD 
4.10-RELEASE #3 install on.
>Fix:
      
>Release-Note:
>Audit-Trail:
>Unformatted: