i386/61342: CD-based installation crashes as kernel "device probing , please wait..." message hangs

[kostya berger]

The following reply was made to PR i386/61342; it has been noted by GNATS.

From: kostya berger <kostya at ztel.ru>
To: freebsd-gnats-submit at FreeBSD.org, bergerkos at ztel.ru
Cc:  
Subject: Re: i386/61342: CD-based installation crashes as kernel "device probing , please wait..." message hangs
Date: Fri, 16 Jan 2004 07:22:16 +0300

 --Boundary-00=_4b2BAooeqHNVxDL
 Content-Type: text/plain;
   charset="us-ascii"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline
 
  	Finally, I can tell for sure what the problem is : it is with my PCI 
 hardware modem 3COM USRobotics 56K .Althouhg it works just fine under Linux 
 and Windows , the FreeBSD kernel in both 4.9 and 5.1 releases cannot cope 
 with it correctly . In both cases installation hangs , but in 5.1 I can see a 
 DEBUG message on F2 : "trying to create /dev/cuaa0 ... " and then silence ! 
 In fact it is on COM5 in Windows and /dev/ttyS4 in Linux that my modem is 
 registered , which corresponds with /dev/cuaa4 in FreeBSD , doesn't it ? As I 
 removed it from the machine , the installation went OK . I installed it back 
 after the installation was over , the system booted and functioned OK  , but 
 again couldn't cope with the modem : "couldn't open" it when I tried "query 
 modem" function in KPPP utility in KDE . The whole thing seems to go better 
 with the 5.2 kernel as it doesn't hang . How can I handle it with the 5.1 
 release ?  Here I'm sending you the output of my Linux DMESG ; in the FreeBSD 
 DMESG the modem is found at sio.0.Thank you for your help and hard work  in 
 which I hope my information will be of some assistance .
 Kostya Berger.
 --Boundary-00=_4b2BAooeqHNVxDL
 Content-Type: text/plain;
   charset="us-ascii";
   name="dmesg.txt"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: attachment; filename="dmesg.txt"
 
 Linux version 2.4.20-9asp (build at localhost.localdomain) (gcc version 3.2.2 20030222 (ASPLinux 3.2.2-5asp)) #1 Tue Apr 29 22:46:49 MSD 2003
 BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 00000000077f0000 (usable)
  BIOS-e820: 00000000077f0000 - 00000000077f3000 (ACPI NVS)
  BIOS-e820: 00000000077f3000 - 0000000007800000 (ACPI data)
  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
 0MB HIGHMEM available.
 119MB LOWMEM available.
 On node 0 totalpages: 30704
 zone(0): 4096 pages.
 zone(1): 26608 pages.
 zone(2): 0 pages.
 Kernel command line: root=/dev/hda6 ro hdc=ide-scsi
 ide_setup: hdc=ide-scsi
 Initializing CPU#0
 Detected 1793.409 MHz processor.
 Console: colour VGA+ 80x25
 Calibrating delay loop... 3578.26 BogoMIPS
 Memory: 116332k/122816k available (1353k kernel code, 5140k reserved, 1001k data, 132k init, 0k highmem)
 Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
 Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
 Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
 Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
 CPU: Trace cache: 12K uops, L1 D cache: 8K
 CPU: L2 cache: 128K
 Intel machine check architecture supported.
 Intel machine check reporting enabled on CPU#0.
 CPU:     After generic, caps: 3febfbff 00000000 00000000 00000000
 CPU:             Common caps: 3febfbff 00000000 00000000 00000000
 CPU: Intel(R) Celeron(R) CPU 1.80GHz stepping 03
 Enabling fast FPU save and restore... done.
 Enabling unmasked SIMD FPU exception support... done.
 Checking 'hlt' instruction... OK.
 POSIX conformance testing by UNIFIX
 mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
 mtrr: detected mtrr type: Intel
 PCI: PCI BIOS revision 2.10 entry at 0xfb530, last bus=1
 PCI: Using configuration type 1
 PCI: Probing PCI hardware
 PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
 Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
 PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0
 PCI: Found IRQ 11 for device 00:1f.1
 PCI: Sharing IRQ 11 with 00:02.0
 isapnp: Scanning for PnP cards...
 isapnp: No Plug & Play device found
 Linux NET4.0 for Linux 2.4
 Based upon Swansea University Computer Society NET3.039
 Initializing RT netlink socket
 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
 Starting kswapd
 VFS: Disk quotas vdquot_6.5.1
 pty: 2048 Unix98 ptys configured
 Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
 ttyS0 at 0x03f8 (irq = 4) is a 16550A
 PCI: Found IRQ 5 for device 01:01.0
 Redundant entry in serial pci_table.  Please send the output of
 lspci -vv, this message (12b9,1008,12b9,00aa)
 and the manufacturer and name of serial board or modem board
 to serial-pci-info at lists.sourceforge.net.
 ttyS4 at port 0xc000 (irq = 5) is a 16550A
 Real Time Clock Driver v1.10e
 Floppy drive(s): fd0 is 1.44M
 FDC 0 is a post-1991 82077
 NET4: Frame Diverter 0.46
 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
 Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 ICH4: IDE controller at PCI slot 00:1f.1
 PCI: Found IRQ 11 for device 00:1f.1
 PCI: Sharing IRQ 11 with 00:02.0
 ICH4: chipset revision 2
 ICH4: not 100% native mode: will probe irqs later
     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
 hda: WDC WD200EB-00CPF0, ATA DISK drive
 blk: queue c03cbf40, I/O limit 4095Mb (mask 0xffffffff)
 hdc: RICOH CD-RW MP7400A R107 20020620, ATAPI CD/DVD-ROM drive
 hdd: HITACHI CDR-8335, ATAPI CD/DVD-ROM drive
 hdd: Disabling (U)DMA for HITACHI CDR-8335
 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
 ide1 at 0x170-0x177,0x376 on irq 15
 hda: host protected area => 1
 hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA(100)
 ide-floppy driver 0.99.newide
 Partition check:
  hda: hda2 hda3 < hda5 hda6 >
 ide-floppy driver 0.99.newide
 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
 md: Autodetecting RAID arrays.
 md: autorun ...
 md: ... autorun DONE.
 NET4: Linux TCP/IP 1.0 for NET4.0
 IP Protocols: ICMP, UDP, TCP, IGMP
 IP: routing cache hash table of 512 buckets, 4Kbytes
 TCP: Hash tables configured (established 8192 bind 16384)
 Linux IP multicast router 0.06 plus PIM-SM
 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
 RAMDISK: Compressed image found at block 0
 Freeing initrd memory: 480k freed
 VFS: Mounted root (ext2 filesystem).
 Journalled Block Device driver loaded
 kjournald starting.  Commit interval 5 seconds
 EXT3-fs: mounted filesystem with ordered data mode.
 Freeing unused kernel memory: 132k freed
 usb.c: registered new driver usbdevfs
 usb.c: registered new driver hub
 usb-uhci.c: $Revision: 1.275 $ time 23:24:22 Apr 29 2003
 usb-uhci.c: High bandwidth mode enabled
 PCI: Setting latency timer of device 00:1d.0 to 64
 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11
 usb-uhci.c: Detected 2 ports
 usb.c: new USB bus registered, assigned bus number 1
 hub.c: USB hub found
 hub.c: 2 ports detected
 PCI: Setting latency timer of device 00:1d.1 to 64
 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9
 usb-uhci.c: Detected 2 ports
 usb.c: new USB bus registered, assigned bus number 2
 hub.c: USB hub found
 hub.c: 2 ports detected
 PCI: Setting latency timer of device 00:1d.2 to 64
 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
 usb-uhci.c: Detected 2 ports
 usb.c: new USB bus registered, assigned bus number 3
 hub.c: USB hub found
 hub.c: 2 ports detected
 usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
 PCI: Setting latency timer of device 00:1d.7 to 64
 ehci-hcd 00:1d.7: Intel Corp. 82801DB USB EHCI Controller
 ehci-hcd 00:1d.7: irq 3, pci mem c804e000
 usb.c: new USB bus registered, assigned bus number 4
 ehci-hcd 00:1d.7: enabled 64bit PCI DMA
 PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
 PCI: 00:1d.7 PCI cache line size corrected to 128.
 ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
 hub.c: USB hub found
 hub.c: 6 ports detected
 usb.c: registered new driver hiddev
 usb.c: registered new driver hid
 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
 hid-core.c: USB HID support drivers
 mice: PS/2 mouse device common for all mice
 EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
 Adding Swap: 265032k swap-space (priority -1)
 hdd: ATAPI 24X CD-ROM drive, 128kB Cache
 Uniform CD-ROM driver Revision: 3.12
 SCSI subsystem driver Revision: 1.00
 scsi0 : SCSI host adapter emulation for IDE ATAPI devices
   Vendor: RICOH     Model: CD-RW MP7400A     Rev: R107
   Type:   CD-ROM                             ANSI SCSI revision: 02
 parport0: PC-style at 0x378 [PCSPP,TRISTATE]
 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
 ip_tables: (C) 2000-2002 Netfilter core team
 ip_conntrack version 2.1 (959 buckets, 7672 max) - 324 bytes per conntrack
 parport0: PC-style at 0x378 [PCSPP,TRISTATE]
 lp0: using parport0 (polling).
 lp0: console ready
 Intel 810 + AC97 Audio, version 0.24, 23:22:34 Apr 29 2003
 PCI: Found IRQ 10 for device 00:1f.5
 PCI: Sharing IRQ 10 with 00:1f.3
 PCI: Setting latency timer of device 00:1f.5 to 64
 i810: Intel ICH4 found at IO 0xe400 and 0xe000, MEM 0xe0081000 and 0xe0082000, IRQ 10
 i810: Intel ICH4 mmio at 0xc80d0000 and 0xc8119000
 i810_audio: Primary codec has ID 2
 i810_audio: Audio Controller supports 6 channels.
 i810_audio: Defaulting to base 2 channel mode.
 i810_audio: Resetting connection 0
 i810_audio: Connection 0 with codec id 2
 ac97_codec: AC97  codec, id: CMI65 (Unknown)
 i810_audio: only 48Khz playback available.
 i810_audio: AC'97 codec 2 Unable to map surround DAC's (or DAC's not present), total channels = 2
 Linux agpgart interface v0.99 (c) Jeff Hartmann
 agpgart: Maximum main memory to use for agp memory: 86M
 agpgart: Detected an Intel(R) 845G Chipset.
 agpgart: Detected 8060K stolen memory.
 agpgart: AGP aperture is 128M @ 0xd8000000
 memory : c59f2f80
 memory : c3740100
 memory : c3740180
 [drm] AGP 0.99 on Intel i810 @ 0xd8000000 128MB
 [drm] Initialized i830 1.3.2 20021108 on minor 0
 mtrr: base(0xd8020000) is not aligned on a size(0x400000) boundary
 memory : c3740280
 memory : c3740300
 memory : c3740380
 memory : c3740400
 PCI: Found IRQ 11 for device 00:02.0
 PCI: Sharing IRQ 11 with 00:1f.1
 memory : c5adb180
 memory : c5adb380
 memory : c5adb480
 mtrr: base(0xd8020000) is not aligned on a size(0x400000) boundary
 memory : c5adb500
 memory : c5adb700
 memory : c5adb400
 memory : c5adb800
 PCI: Found IRQ 11 for device 00:02.0
 PCI: Sharing IRQ 11 with 00:1f.1
 
 --Boundary-00=_4b2BAooeqHNVxDL--