i386/60500: system hangs on defect pccard

[Josef El-Rayes]

>Number:         60500
>Category:       i386
>Synopsis:       system hangs on defect pccard
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          update
>Submitter-Id:   current-users
>Arrival-Date:   Mon Dec 22 03:20:15 PST 2003
>Closed-Date:
>Last-Modified:
>Originator:     Josef El-Rayes
>Release:        FreeBSD 5.2-RC1 i386
>Organization:
>Environment:
System: FreeBSD gina.daemon.li 5.2-RC1 FreeBSD 5.2-RC1 #0: Sun Dec 7 22:15:14 GMT 2003 root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386


	
>Description:
	The problems started when i wanted to set up the machine,
	with the pccard inserted in the pcmcia slot, i got
	panics when the boot floppy kernel probed the devices.
	as the card sometimes works (i will explain later)
	there is no problem, so i was able to set up the machine.

	On booting the machine, the start up hangs, and after booting
        the machine would hang when i insert the card. That means
	the keyboard is not reacting. When i remove the card every
	thing is fine again.

	on booting, when card is inserted, i get following output:

	...
	acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
	cbb0: ready never happenend, status 4f
	CIS is too long -- truncating
	pccard0: Card has no functions!
	cbb0: PC Card card activation failed

	Here the machine just stops and does not react any more.
	When i remove the card the i continues boot and finishes
	without any problems.

	i have not altered kernel and userland - it is still the
	one that comes with 5.2-RC1.	
	
>How-To-Repeat:
	insert the card in pcmcia slot
	
>Fix:

	


>Release-Note:
>Audit-Trail:
>Unformatted: