pcie realtek issue (re driver)

[YongHyeon PYUN]

On Fri, May 25, 2012 at 10:14:27PM -0400, Mike Tancsa wrote:
> My recent batch of realtek nics seems to have a version that does not
> work with RELENG_8 or RELENG_9. Anyone know what the issue might be ?
> 
> 
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> at device
> 0.0 on pci4
> re0: Using 1 MSI-X message
> re0: turning off MSI enable bit.
> re0: ASPM disabled
> re0: Chip rev. 0x7c800000
                 ^^^^^^^^^^

If memory serves me right there would be no known controller for
revision 0x7c800000.  Actually I wonder how re(4) can attach to
this unknown device.
Did you apply local patch?

> re0: MAC rev. 0x00400000
> re0: reset never completed!
> re0: PHY write failed
> re0: PHY write failed
> re0: attaching PHYs failed
> device_attach: re0 attach returned 6
> 
> 
> none2 at pci0:4:0:0:       class=0x020000 card=0x816810ec chip=0x816810ec
> rev=0x03 hdr=0x00
>     vendor     = 'Realtek Semiconductor Co., Ltd.'
>     device     = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
>     class      = network
>     subclass   = ethernet
>     bar   [18] = type I/O Port, range 32, base 0xfffffffc, size  4, disabled
>     bar   [20] = type I/O Port, range 32, base 0xfffffffc, size 16384,
> disabled
>     cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
>     cap 05[50] = MSI supports 1 message, 64 bit
>     cap 10[70] = PCI-Express 15 type 15 IRQ 62 max data 16384(16384)
> link x63(x63)