Modem GPRS USB

[Vinícius Abrahão]

Hi Rui Pablo,

thanks for your help: with usbsa(4) (and without umass, ugen, etc) my modem
is working normaly (both: pcmcia[huawei] and usb[qualcomm3]).

But now I have one other problem that need your help if possible?

When I connect I recive this:

May 16 12:17:08 vinnix ppp[1262]: tun0: Warning: 0.0.0.0: Change route
failed: errno: No such process
May 16 12:17:08 vinnix ppp[1262]: tun0: Warning: ff02:5::: Change route
failed: errno: Network is unreachable

The PPP fails to get a default route, after connect.
Can you help-me with this?

Thanks again!!!

Best regards,
Vinnix


On Wed, May 14, 2008 at 11:17 AM, Rui Paulo <rpaulo at freebsd.org> wrote:

> Vinícius Abrahão wrote:
>
>> Hi People,
>>
>> First, sorry about my poor english.
>> I have modem usb: hsdpa/edge/gprs, but I don't know how to
>> make this work. This is the description about the device:
>>
>> umass0: <Qualcomm, Incorporated USB ONDA Storage, class 0/0, rev
>> 1.10/0.00,
>> addr 2> on uhub2
>> cd0 at umass-sim0 bus 0 target 0 lun 0
>> cd0: <ONDA USB Storage 2.31> Removable CD-ROM SCSI-2 device
>> cd0: 1.000MB/s transfers
>> cd0: cd present [4623 x 2048 byte records]
>> GEOM_LABEL: Label for provider cd0 is iso9660/ONDAMODEM
>>
>> At my kernel configuration file we find:
>> device ugen                     # Generic
>> device ucom                     # Modem UCOM
>> device ugencom                  # Modem CDMA MSM
>> device umodem                   # Modem COM
>>
>> Thanks in advice for any light.
>>
>
> Since we don't have yet a way to unplug these modems from umass, you should
> remove umass, ugen, ucom, etc. from your kernel config file and build it as
> modules.
>
> I have a similar modem, and what I did was:
> 1) Don't have umass.ko loaded.
> 2) Wait a few seconds. The device will disconnect.
> 3) ubsa(4) should support these modems, so have it loaded, or load it now.
>
> Hope this works,
> --
> Rui Paulo
>