ZTE MG478 usbmodem

[Eimar Koort]

Hi,
Just to be correct. Below should be:

/usr/src/sys/dev/usb/usbdevs
/usr/src/sys/dev/usb/usb_quircs.c


No luck at all.
> What i did:
> added two lines to /usr/src/sys/usb/usbdevs
>
> vendor ZTE 0x19d2 ZTE
> product ZTE MG478 0xfffe ZTE CDMA2000
>
> Added to /usr/src/sys/usb/usb_quircs.c
> { USB_VENDOR_ZTE, USB_PRODUCT_ZTE_MG478, ANY { UQ_ASSUME_CM_OVER_DATA }},
>
> In kernel config added following:
>
> device umodem
> device ucom
>
> New kernel and after connecting device:
>
> uhub0: device problem (SET_ADDR_FAILED), disabling port 1
> ugen0: ZTE, Incorporated ZTE CDMA Tech, rev 1.10/0.00, addr 2
>
> laptop# usbdevs -v
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x0000), rev 1.00
>  port 1 addr 2: full speed, self powered, config 1, ZTE CDMA Tech(0xfffe),
> ZTE, Incorporated(0x19d2), rev 0.00
>  port 2 powered
>
> Any ideas?
>

-- 
Eimar Koort
( eimar.koort at gmail.com )