Example 'megacli -AdpAllInfo -aAll' output

[Brian A. Seklecki]

I'm trying to write a Nagios plugin (or use an existing one).  Can
someone send me working output?  I have to ktrace my megacli(8) binary.
It's returning bogus data on my 6.2/amd64 box.

~BAS

[seklecki at web05 ~]$ sudo megacli -AdpAllInfo -aAll 2>&1
                                     
Adapter #0

==============================================================================
                Versions
                ================
Product Name    : 
Serial No       : 
FW Package Build: 
FW Version      :                                 
BIOS Version    :                                 
Ctrl-R Version  :                                

                Pending Images In Flash
                ================
None

                PCI Info
                ================
Vendor Id       : 0000
Device Id       : 0000
SubVendorId     : 0000
SubDeviceId     : 0000

Host Interface  : UNKOWN

Number of Frontend Port: 0 
Device Interface  : UNKOWN

Number of Backend Port: 0 

                HW Configuration
                ================
SAS Address     : 0
BBU             : Absent
Alarm           : Absent
NVRAM           : Absent
Serial Debugger : Absent
Memory          : Absent
Flash           : Absent

                Settings
                ================
Current Time                     : 0:0:0 0/0, 0
Predictive Fail Poll Interval    : 0sec
Interrupt Throttle Active Count  : 0
Interrupt Throttle Completion    : 0us
Rebuild Rate                     : 0%
PR Rate                          : 0%
Resynch Rate                     : 0%
Check Consistency Rate           : 0%
Reconstruction Rate              : 0%
Cache flush interval             : 0s
Max drives to spinup at one time : 0
Delay among spinup groups        : 0s
Physical drive coercion mode     : Disabled
Cluster mode                     : Disabled
Alarm                            : Disabled
Auto Rebuild                     : Enabled
Battery Warning                  : Enabled

Ecc Bucket Size                  : 0
Ecc Bucket Leak Rate             : 0 Minutes
Restore HotSpare On Insertion    : Disabled
Expose Enclosure Devices         : Disabled
Maintain PD Fail History         : Disabled
Host Request Reordering          : Enabled

                Capabilities
                ================
RAID Level Supported             :      Ûÿÿ
Supported Drives                 : üÖÿÿd½

Allowed Mixing:
NONE

                Status
                ================
ECC Bucket Count                 : 0

                Limitations
                ================
Max Arms Per VD         : 0 
Max Spans Per VD        : 0 
Max Arrays              : 0 
Max Number of VDs       : 0 
Max Parallel Commands   : 0 
Max SGE Count           : 0 
Max Data Transfer Size  : 0 sectors 
Max Strips PerIO        : 0 
Min Stripe Size         : 512Bytes
Max Stripe Size         : 512Bytes

                Device Present
                ================
Virtual Drives    : 0 
  Degraded        : 0 
  Offline         : 0 
Physical Devices  : 0 
  Disks           : 0 
  Critical Disks  : 0 
  Failed Disks    : 0 

                Supported Adapter Operations
                ================
Rebuild Rate                    : No
CC Rate                         : No
BGI Rate                        : No
Reconstruct Rate                : No
Patrol Read Rate                : No
Alarm Control                   : No
Cluster Support                 : No
BBU                             : No
Spanning                        : No
Dedicated Hot Spare             : No
revertible Hot Spares           : No
Foreign Config Import           : No
Self Diagnostic                 : No
Allow Mixed Redundancy On Array : No
Global Hot Spares               : No
Deny SCSI Passthrough           : No
Deny SMP Passthrough            : No
Deny STP Passthrough            : No

                Supported VD Operations
                ================
Read Policy          : No
Write Policy         : No
IO Policy            : No
Access Policy        : No
Disk Cache Policy    : No
Reconstruction       : No
Deny Locate          : No
Deny CC              : No

                Supported PD Operations
                ================
Force Online              : No
Force Offline             : No
Force Rebuild             : No
Deny Force Failed         : No
Deny Force Good/Bad       : No
Deny Missing Replace      : No
Deny Clear                : No
Deny Locate               : No

                Error Counters
                ================
Memory Correctable Errors   : 0 
Memory Uncorrectable Errors : 0 

                Cluster Information
                ================
Cluster Permitted     : No
Cluster Active        : No

                Default Settings
                ================
Phy Polarity                   : 0 
Phy PolaritySplit              : 0 
Backgroud Rate                 : 0 
Stripe Size                    : 512Bytes
Flush Time                     : 0 seconds
Write Policy                   : WT
Read Policy                    : None
Cache When BBU Bad             : Disabled
Cached IO                      : No
SMART Mode                     : Mode 6
Alarm Disable                  : Yes
Coercion Mode                  : None
ZCR Config                     : Unkown
Dirty LED Shows Drive Activity : No
BIOS Continue On Error         : No
Spin Down Mode                 : None
Allowed Device Type            : SAS/SATA Mix
Allow Mix In Enclosure         : No
Allow Mix In VD                : No
Allow SATA In Cluster          : No
Max Chained Enclosures         : 0 
Disable Ctrl-R                 : No
Enable Web BIOS                : No
Direct PD Mapping              : No
BIOS Enumerate VDs             : No
Restore Hot Spare On Insertion : No
Expose Enclosure Devices       : No
Maintain PD Fail History       : No

-- 
Brian A. Seklecki <bseklecki at collaborativefusion.com>
Collaborative Fusion, Inc.




IMPORTANT: This message contains confidential information and is intended only for the individual named. If the reader of this message is not an intended recipient (or the individual responsible for the delivery of this message to an intended recipient), please be advised that any re-use, dissemination, distribution or copying of this message is prohibited.  Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.