BCM5754 recognized incorrectly on 6.2 beta2

[Kevin Kramer]

I have a Precision 390 with a BCM5754, FreeBSD recognizes it as a 
BCM5787 then panics the machine. I have a screenshot of the panic here,
http://users.centtech.com/~kramer/broadcom/bge_prec390.jpg

and I've booted the host into a FC3 nfsroot using kernel 2.6.18. Here is 
the dmesg and scanpci -v output

DMESG

tg3.c:v3.65 (August 07, 2006)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 
10/100/1000Base
T Ethernet 00:13:72:25:67:ec
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] 
TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]

SCANPCI -v

pci bus 0x0004 cardnum 0x00 function 0x00: vendor 0x14e4 device 0x167a
 Broadcom Corporation  Device unknown
 CardVendor 0x1028 card 0x01de (Card unknown)
  STATUS    0x0010  COMMAND 0x0006
  CLASS     0x02 0x00 0x00  REVISION 0x02
  BIST      0x00  HEADER 0x00  LATENCY 0x00  CACHE 0x10
  BASE0     0x00000000eddf0004  addr 0x00000000eddf0000  MEM 64BIT
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x01  INT_LINE 0x0a

-- 


------------------------------

Kevin Kramer
Sr. Systems Administrator
512.418.5725
Centaur Technology, Inc.
www.centtech.com