FreeBSD SATA

[George Kontostanos]

Could you run a memtest? I had a similar problem once due to bad memory,
Regards,
George

On 12/6/06, Josh Stephenson <jstep at unm.edu> wrote:
>
> I'm having trouble installing FreeBSD on the following system:
> Intel Desktop Board DG965SS motherboard
> Intel Core Duo 2.8GHz
> 1GB Memory
> 1 SATA hard-drive
> 1 dvd/cd-burner sony dru-120c
>
> Here's the problem:
>
> When I boot the install, I get:
> Too many holes in the physical address space, giving up
> Too many holes in the physical address space, giving up
> Too many holes in the physical address space, giving up
> .....
>
> and then the system hangs at either this line:
> Interrupt storm detected on "irq17:"; throttling interrupt source
>
> or sometimes, I actually get into the install screen, but the response
> is ridiculously slow.  ie- I press the down arrow, and 30 seconds later,
> it respons, but eventually it just hangs completely.
>
> Any help would be much appreciated.
>
> -josh
> _______________________________________________
> freebsd-hardware at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe at freebsd.org
> "
>