Another BIOS RAID or host based RAID question
Vinod Kashyap
vkashyap at amcc.com
Tue May 3 11:17:50 PDT 2005
> -----Original Message-----
> From: owner-freebsd-hardware at freebsd.org
> [mailto:owner-freebsd-hardware at freebsd.org]On Behalf Of Franco Bruno
> Borghesi
> Sent: Tuesday, May 03, 2005 7:05 AM
> To: Toll, Eric
> Cc: freebsd-hardware at freebsd.org
> Subject: Re: Another BIOS RAID or host based RAID question
>
>
> Yes, I am using 3 servers with hardware raid:
>
> a)3ware 7500 with 4 ATA disks (1 spare) WD 160 GB in RAID 5,
> works great.
> b)Mylex AcceleRAID 160 with 3 SCSI 8 GB Quantum disks, RAID
> 5, works great.
> c)3ware 9600s with 4 SATA 150 disks (1 spare) WD 160 GB in
> RAID 5. Many
> problems, occasional reboots, couldn't get any help from the lists.
>
Please contact 3ware support if you are experiencing problems.
> The 3ware 7500 board comes in severall flavours, you could
> try a two channel
> model, though the only utility you have is tw_cli, it's
> console based, no
> alarms. It's also an ATA controller :(
>
3ware CLI and 3DM2 (web-based GUI) for 9xxx series controllers also
work for 7xxx/8xxx series controllers.
> Hope this helps.
>
> 2005/5/2, Toll, Eric <etoll at vipstructures.com>:
> >
> > I see the list littered with many unanswered RAID
> questions, is anyone
> > using
> > hardware based RAID with FreeBSD 5.X? If so what exactly do
> you have for
> > equipment?
> >
> > Want to get 2 identical 74Gb drives, could be SATA or SCSI,
> would like to
> > setup
> > controller or bios to to the RAID - not software raid. e.g.
> create the
> > mirror
> > set in BIOS then install BSD.
> >
> > I have purchased *nothing* yet. I'd like an easy to set up
> (via BIOS) RAID
> > 1
> > set, then install FreeBSD 5.3 onto it, FreeBSD would see
> the Raided set of
> > disks
> > as ONE disk.
> >
> > The old HP SCSI Raid Controllers would make a very loud
> alarm noise when
> > the
> > RAID array was in trouble, I really want this feature!
> >
> > Anyone recommend a nice compatible card or board that will
> do what I want?
> >
> > I am grateful for your answers.
> >
> > Eric
> >
> > "That is not a puzzle, Grasshopper. It is only something
> you do not yet
> > understand." -Master Po
> >
> > _______________________________________________
> > freebsd-hardware at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> > To unsubscribe, send any mail to
> "freebsd-hardware-unsubscribe at freebsd.org
> > "
> >
> _______________________________________________
> freebsd-hardware at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to
> "freebsd-hardware-unsubscribe at freebsd.org"
>
More information about the freebsd-hardware
mailing list