Looking for supported 32 or 64bit/66Mhz SATA Hardware RAID 5
Controller on 5.3-STABLE
Mark Picone
wts666 at iprimus.com.au
Wed Nov 17 00:20:16 PST 2004
Hey,
I had to research this a few months ago, and i found that intel
sata raid5 cards are the best
compared to the 3ware sata range in the way of stability and
support on freebsd, duno about
Promise, but make sure the card has an XOR processor on it to
take some load of the cpu, all
intel raid cards use the same driver which is handy.
-Mark
Vulture wrote:
>Hello All,
>I've seen some posts on this before with no results. The hardware list doesn't
>seem to show much on ata type controllers anymore. Hopefully somebody can point
>me in the direction of a good, decently priced controller.
>
>The Promise FastTrak S150 looks good, but is 5.3-STABLE going to get close to
>using it properly? I would love to get one of the 15 drive external promise
>SATA RAID to U320 enclosures - but the $15K price tag is a little much.
>
>I would use vinum, but SATA driver instability and PCI Bus bottlenecks are
>keeping my Maxtor 300GB 16MB 7200's from getting close to their potential.
>
>Thanks -Jon
>
>----------------------------------------------------------------
>This message was sent using IMP, the Internet Messaging Program.
>_______________________________________________
>freebsd-hardware at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
>To unsubscribe, send any mail to "freebsd-hardware-unsubscribe at freebsd.org"
>
>
>
More information about the freebsd-hardware
mailing list