Parallel port :(
Bill Schoolcraft
bill at wiliweld.com
Tue Nov 16 09:51:43 PST 2004
At Tue, 16 Nov 2004 it looks like mvzp10 at cln.ru composed:
> Surprisingly, I couldn't make parallel port working on my shiny new
> FreeBSD system. Works ok on windows. Chip is
> Intel(R) 82801DBM LPC Interface Controller as far as I can
> see from windows :) Any ideas why?
I've had install kernels wedge when hitting some of the parallel
ports on some machines. I've had to disable the port from the
BIOS just to get past the install.
--
Bill Schoolcraft
PO Box 210076
San Francisco,CA 94121
http://billschoolcraft.com
"We can find no wealth above a healthy body and a happy heart."
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f04000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0f042bc.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0f04368.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0f04414.
Calibrating clock(s) ... i8254 clock: 1193164 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1496258582 Hz
CPU: Intel(R) Pentium(R) M processor 1.50GHz (1496.26-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 536215552 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001029000 - 0x000000001f63bfff, 509685760 bytes (124435 pages)
avail memory = 506994688 (483 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f7a50
bios32: Entry = 0xfd711 (c00fd711) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd700+0x281
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086)
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdf10
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 0 A 0x60 3 4 5 7 11
embedded 0 0 B 0x61 3 4 5 7 11
embedded 0 0 C 0x62 3 4 5 7 11
embedded 0 0 D 0x63 3 4 5 7 11
embedded 0 30 A 0x60 3 4 5 7 11
embedded 0 30 B 0x61 3 4 5 7 11
embedded 0 30 C 0x62 3 4 5 7 11
embedded 0 30 D 0x63 3 4 5 7 11
embedded 0 1 A 0x6a 10
embedded 1 0 A 0x6a 10
embedded 0 31 A 0x62 3 4 5 7 11
embedded 0 31 B 0x61 3 4 5 7 11
embedded 0 29 A 0x60 3 4 5 7 11
embedded 0 29 B 0x63 3 4 5 7 11
embedded 0 29 D 0x6b 3 4 5 7 11
embedded 2 11 A 0x60 3 4 5 7 11
embedded 2 8 A 0x68 3 4 5 7 11
embedded 2 10 A 0x63 3 4 5 7 11
embedded 2 10 B 0x60 3 4 5 7 11
embedded 2 13 A 0x60 3 4 5 7 11
embedded 2 7 A 0x69 3 4 5 7 11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks BAD min = 3, max = 420, width = 417
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq 3: [ 3 4 5 7 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 7 11] low,level,sharable 0.29.1
\\_SB_.LNKH irq 7: [ 3 4 5 7 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq 0: [ 3 4 5 7 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq 4: [ 3 4 5 7 11] low,level,sharable 0.31.1
---- before setting priority for links ------------
\\_SB_.LNKC:
interrupts: 3 4 5 7 11
penalty: 1210 1210 110 1210 210
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKC:
interrupts: 3 4 5 7 11
penalty: 1210 1210 110 1210 210
references: 1
priority: 790
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 3: [ 3 4 5 7 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 7 11] low,level,sharable 0.29.1
\\_SB_.LNKH irq 7: [ 3 4 5 7 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq 5: [ 3 4 5 7 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq 4: [ 3 4 5 7 11] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 28, enabled
found-> vendor=0x8086, dev=0x3340, revid=0x21
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3341, revid=0x21
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001800, size 5, enabled
pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA)
pcib0: slot 29 INTA is routed to irq 3
found-> vendor=0x8086, dev=0x24c2, revid=0x03
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x24c4, revid=0x03
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 1, range 32, base c0000000, size 10, enabled
pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH)
pcib0: slot 29 INTD is routed to irq 7
found-> vendor=0x8086, dev=0x24cd, revid=0x03
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=7
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x2448, revid=0x83
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x8080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24cc, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00000000, size 3, enabled
map[14]: type 4, range 32, base 00000000, size 2, enabled
map[18]: type 4, range 32, base 00000000, size 3, enabled
map[1c]: type 4, range 32, base 00000000, size 2, enabled
map[20]: type 4, range 32, base 00001840, size 4, enabled
found-> vendor=0x8086, dev=0x24ca, revid=0x03
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 00001c00, size 8, enabled
map[14]: type 4, range 32, base 00001880, size 6, enabled
map[18]: type 1, range 32, base c0000c00, size 9, enabled
map[1c]: type 1, range 32, base c0000800, size 8, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 4
found-> vendor=0x8086, dev=0x24c5, revid=0x03
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=4
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 4, range 32, base 00002000, size 7, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 4
found-> vendor=0x8086, dev=0x24c6, revid=0x03
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=4
powerspec 2 supports D0 D3 current D0
agp0: <Intel 82855 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xc1000000-0xc1ffffff
pcib1: prefetched decode 0xe0000000-0xefffffff
---- initial configuration ------------------------
\\_SB_.LNKG irq 10: [ 10] low,level,sharable 1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKG irq 10: [ 10] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base c1000000, size 24, enabled
map[14]: type 3, range 32, base e0000000, size 28, enabled
pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKG)
pcib1: slot 0 INTA is routed to irq 10
found-> vendor=0x10de, dev=0x0324, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
nvidia0: <GeForce FX Go5200> mem 0xe0000000-0xefffffff,0xc1000000-0xc1ffffff irq 10 at device 0.0 on pci1
pcib1: device nvidia0 requested decoded memory range 0xc1000000-0xc1ffffff
pcib1: device nvidia0 requested decoded memory range 0xe0000000-0xefffffff
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 3 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: A4Tech USB Optical Mouse, rev 1.10/0.01, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 3
pcib2: I/O decode 0x3000-0x3fff
pcib2: memory decode 0xc2000000-0xc20fffff
pcib2: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.LNKF irq 3: [ 3 4 5 7 11] low,level,sharable 2.7.0
\\_SB_.LNKE irq 11: [ 3 4 5 7 11] low,level,sharable 2.8.0
\\_SB_.LNKD irq 11: [ 3 4 5 7 11] low,level,sharable 2.10.0
\\_SB_.LNKA irq 3: [ 3 4 5 7 11] low,level,sharable 2.10.1
\\_SB_.LNKA irq 3: [ 3 4 5 7 11] low,level,sharable 2.11.0
\\_SB_.LNKA irq 3: [ 3 4 5 7 11] low,level,sharable 2.13.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKF irq 3: [ 3 4 5 7 11] low,level,sharable 2.7.0
\\_SB_.LNKE irq 11: [ 3 4 5 7 11] low,level,sharable 2.8.0
\\_SB_.LNKD irq 11: [ 3 4 5 7 11] low,level,sharable 2.10.0
\\_SB_.LNKA irq 3: [ 3 4 5 7 11] low,level,sharable 2.10.1
\\_SB_.LNKA irq 3: [ 3 4 5 7 11] low,level,sharable 2.11.0
\\_SB_.LNKA irq 3: [ 3 4 5 7 11] low,level,sharable 2.13.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base c2006000, size 11, enabled
map[14]: type 1, range 32, base c2000000, size 14, enabled
pcib2: matched entry for 2.7.INTA (source \\_SB_.LNKF)
pcib2: slot 7 INTA is routed to irq 3
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=2, slot=7, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c2004000, size 12, enabled
map[14]: type 4, range 32, base 00003000, size 6, enabled
pcib2: matched entry for 2.8.INTA (source \\_SB_.LNKE)
pcib2: slot 8 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x103d, revid=0x83
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c2005000, size 12, enabled
pcib2: matched entry for 2.10.INTA (source \\_SB_.LNKD)
pcib2: slot 10 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x4220, revid=0x05
bus=2, slot=10, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1179, dev=0x0617, revid=0x33
bus=2, slot=11, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c2006800, size 9, enabled
pcib2: matched entry for 2.13.INTA (source \\_SB_.LNKA)
pcib2: slot 13 INTA is routed to irq 3
found-> vendor=0x1179, dev=0x0805, revid=0x05
bus=2, slot=13, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xc2000000-0xc2003fff,0xc2006000-0xc20067ff irq 3 at device 7.0 on pci2
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
pcib2: device fwohci0 requested decoded memory range 0xc2006000-0xc20067ff
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:39:00:00:50:2f:d8
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x3 loop=0, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:39:50:2f:d8
fwe0: bpf attached
sbp0: <SBP-2/SCSI over FireWire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x3000-0x303f mem 0xc2004000-0xc2004fff irq 11 at device 8.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xc2004000-0xc2004fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:0e:7b:9d:83:16
fxp0: PCI IDs: 8086 103d 1179 0001 0083
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
pci2: <network> at device 10.0 (no driver attached)
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci2
start (88000000) < sc->membase (c2000000)
end (ffffffff) > sc->memlimit (c20fffff)
pcib2: device cbb0 requested decoded memory range 0x88000000-0xffffffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.11.INTA (source \\_SB_.LNKA)
pcib2: slot 11 INTA is routed to irq 3
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x06171179 0x04900007 0x06070033 0x00022000
0x10: 0x88000000 0x04800080 0x00030302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x04000103
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0xfe110001 0x00800000 0x00000000 0x01000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x860011f0 0x0c000002 0x00000000 0x0000d100
0xb0: 0x3f3f3fcf 0x0a081020 0x14010100 0x00423f00
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00040000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pci2: <base peripheral> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1840-0x184f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
ppc0: parallel port not found.
unknown: not probed (disabled)
ppc0: parallel port not found.
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe3000-0xe3fff,0xd4000-0xd57ff,0xd0000-0xd3fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x9 0x9 0x9 0x9
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x9 0x9 0x9 0x9
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1496258582 Hz quality 800
Timecounters tick every 10.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata1: spurious interrupt - status=0x00 error=0x01
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
1efcc000 OUTL ST2 ALL ALL 12 00000000 1efcc080 8411:000f RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH4 chip
ata0-master: setting UDMA100 on Intel ICH4 chip
GEOM: create disk ad0 dp=0xc4da9460
ad0: <TOSHIBA MK4025GAS/KA101A> ATA-6 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:28675962
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:28676025 l:40949685
[2] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/254/63 s:69625710 l:8498385
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 14682092544 end 14682124799
GEOM: Configure ad0s2, start 14682124800 length 20966238720 end 35648363519
GEOM: Configure ad0s3, start 35648363520 length 4351173120 end 39999536639
GEOM: Configure ad0s2a, start 536870912 length 5368709120 end 5905580031
GEOM: Configure ad0s2b, start 0 length 536870912 end 536870911
GEOM: Configure ad0s2c, start 0 length 20966238720 end 20966238719
GEOM: Configure ad0s2d, start 5905580032 length 13958643712 end 19864223743
GEOM: Configure ad0s2e, start 19864223744 length 536870912 end 20401094655
GEOM: Configure ad0s2f, start 20401094656 length 565144064 end 20966238719
bus_explore done
sbp_post_explore (sbp_cold=2)
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH4 chip
acd0: <MATSHITADVD-RAM UJ-820S/1.00> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
-------------- next part --------------
_______________________________________________
freebsd-hardware at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-unsubscribe at freebsd.org"
More information about the freebsd-hardware
mailing list