Slow transfer speeds with U320 drives and HP Smart Array 641
Nelis Lamprecht
nelis at brabys.co.za
Tue Mar 23 23:57:09 PST 2004
Hi,
With the ciss driver on my HP ProLiant ML350 I've noticed the transfer
speed on my RAID controller is only.
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C)
Both my drives on the RAID controller are U320 72GB pluggable SCSI's.
The RAID card also has the optional 64MB battery backed write back cache
enabler installed.
I also have a AIC 50/100 Tape Drive in the machine which is connected to the
onboard SCSI interface.
sa0 at ahc1 bus 0 target 6 lun 0
sa0: <COMPAQ SDX-500C 1.35> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 7, 16bit)
My question is why the slow transfer speed of the RAID controller ? Does this
have anything to do with the slower SCSI Tape Drive or is this a limitation of
the ciss driver ? Or perhaps I have misconfigured something ?
Any advice would be appreciated. Thanks for your reply.
Kind Regards,
Nelis
More information about the freebsd-hardware
mailing list