Tape drive support in mlx driver?

[Sandy Rutherford]

Are tape drives supported with the Mylex DAC RAID controllers?  I have
been unable to get it to work or find anything about tape drives in
the mlx documentation?

If they are not supported, is it likely to be in the future?  Is anybody
working on this?

I'm running FreeBSD 4.6 on i386 hardware.

The RAID controller firmware sees the tape drive fine.

Here's the scoop on my RAID controller:

mlx0: DAC1100PVX, 3 channels, firmware 5.08-W-48, 32MB RAM
  Hardware ID                 0x03020320
  Firmware ID                 0x30570805
  Configured/Actual channels  3/3
  Max Targets                 16
  Max Tags                    236
  Max System Drives           32
  Max Arms                    8
  Max Spans                   4
  DRAM/cache/flash/NVRAM size 33554432/31481856/1048576/32768
  DRAM type                   10
  Clock Speed                 40ns
  Hardware Speed              360ns
  Max Commands                128
  Max SG Entries              33
  Max DP                      472
  Max IOD                     1024
  Max Comb                    256
  Latency                     12s
  SCSI Timeout                18s
  Min Free Lines              72
  Rate Constant               50
  MAXBLK                      128
  Blocking Factor             1 sectors
  Cache Line Size             16 blocks
  SCSI Capability             40MHz, 16 bit
  Firmware Build Number       0
  Fault Management Type       0

Thanks...