Mounting swap device on iscsi target

[BERTRAND Joël]

	Hello,

	I'm trying to mount iSCSI swap device during boot process. Of course, I
have checked that configuration doesn't contains errors.

	On running system, if I start /etc/rc.d/iscsictl start, device is
mounted without error. But not during boot, I obtains :

Jan 17 10:48:17 pythagore iscsid[1009]: cannot open or create pidfile
"/var/run/iscsid.pid": Operation not supported
Jan 17 10:48:17 pythagore root[1010]: /etc/rc: WARNING: failed to start
iscsid
Jan 17 10:48:28 pythagore root[1014]: /etc/rc: WARNING: failed to start
iscsictl
Jan 17 10:49:20 pythagore kernel: WARNING: 192.168.10.128
(iqn.2020-02.fr.systella.legendre.istgt:pythagore): timed out waiting
for iscsid(8) for 61 seconds; reconnecting
Jan 17 10:50:23 pythagore kernel: WARNING: 192.168.10.128
(iqn.2020-02.fr.systella.legendre.istgt:pythagore): timed out waiting
for iscsid(8) for 61 seconds; reconnecting

	This workstation doesn't have any hard disk :

root at pythagore:/var/log # df -h
Filesystem                       Size    Used   Avail Capacity  Mounted on
192.168.10.128:/srv/pythagore    523G    221G    276G    44%    /
devfs                            1.0K    1.0K      0B   100%    /dev
procfs                           4.0K    4.0K      0B   100%    /proc
fdescfs                          1.0K    1.0K      0B   100%    /dev/fd
192.168.10.128:/home             3.6T    2.4T    1.0T    71%    /home

	After boot, /var/run/iscsid.pid is created but doesn't contains
anything. If I start by hands iscsid and iscsictl, this file contains
real PID of iscsid and target is connected as da0.

	For information, rc.conf contains :

iscsid_enable="YES"
iscsictl_enable="YES"
iscsictl_flags="-Aa -w 10"

	Best regards,

	JKB