Any WAFER-BT users?

[Milan Obuch]

On Tue, 7 May 2019 09:52:10 +0200
Milan Obuch <freebsd-hackers at dino.sk> wrote:

> On Tue, 16 Apr 2019 09:27:24 +0200
> Milan Obuch <freebsd-hackers at dino.sk> wrote:
> 

[ snip ]

> 
> So after some time and testing I'm back here.
> 
> I have freshly built r347177 and no change, i. e. loader works with
> USB keyboard and VGA, after starting kernel output switches to serial
> port, giving just
> 
> VT: init without driver.
> 
> However, adding
> 
> kern.vty=sc
> 
> into /boot/loader.conf changes things and video console works again.
> So I think probably problem is in vt_vga module not recognising
> CPU/VGA in
> 
> CPU: Intel(R) Celeron(R) CPU  N2807 @ 1.58GHz (1583.38-MHz 686-class
> CPU)
> 
> (I think it is integrated here), even if it is probed later (dmesg
> shows
> 
> vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem
> 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on
> pci0 vgapci0: Boot video device
> 
> and this assignment is seen in pciconf output too, so device is
> somehow detected).
> 

I found another way to enable VGA - adding line

hw.vga.acpi_ignore_no_vga=1

into /boot/loader.conf made kernel to use VGA and keyboard as console
with vt. It works with installation media as well, i. e. GENERIC kernel.
I am not yet able to use VGA with X with FullHD resolution. I can use X
with vesa video only, which makes maximum resolution 1024x768.

Just to share my finding...

Milan