Adding support for MosChip 9912 PCIe (serial/parallel) cards

[Andre Albsmeier]

On Fri, 02-Mar-2018 at 08:36:40 -0500, Daniel Eischen wrote:
> On Fri, 2 Mar 2018, Andre Albsmeier wrote:
> 
> > I have a MosChip 9912 card (PCIe card with 1 parallel and 2 serial
> > ports) sitting here which does not get detected on 11.1. I tried
> > to simply add it to the uart and ppc drivers with
> >
> [ ... ]
> 
> Do you try adding similar support to puc_pci_devices[] in
> sys/dev/puc/pucdata.c?

Just tried that:

@@ -1204,6 +1204,11 @@
            PUC_PORT_1S1P, 0x10, 4, 0,
        },
 
+{   0x9710, 0x9912, 0xa000, 0x3012,
+    "NetMos NM9912 Dual UART and 1284 Printer port",
+    DEFAULT_RCLK,
+    PUC_PORT_2S1P, 0x10, 4, 0,
+},
        {   0x9710, 0x9865, 0xa000, 0x3012,
            "NetMos NM9865 Dual UART and 1284 Printer port",
            DEFAULT_RCLK,

But the results are exactly the same. It also doesn't
matter if puc.ko is loaded at all.

	-Andre