iPXE booting latest PCengines alu board

[Daniel Braniss]

On Jun 17, 2014, at 9:26 PM, Julian Elischer <julian at freebsd.org> wrote:

> On 6/17/14, 7:05 PM, Daniel Braniss wrote:
>> if a gateway is needed, then all is ok.
>> any ideas?
> you are giving it the wrong netmask?
> 
no.
BTW, the same setup is being used for PXE, and works (and has been working since way back :-),
it seems our pxe/pxeboot work fine with ‘standard’ PXE, but fails with iPXE. I tracked it down to
the rpc doing a sendutp and !PXE returning status = 1, fail, and I see no traffic on the wire, there should have
been an ARP request.
just a shot in the dark, but it seems PXE handles correctly the routing (send to gateway or local net)
while iPXE does not.

thanks,
	danny