Mellanox 10gb driver?

[Daniel Braniss]

On Aug 16, 2014, at 10:04 AM, Hans Petter Selasky <hps at selasky.org> wrote:

> On 08/16/14 09:02, Daniel Braniss wrote:
>> 
>> On Aug 16, 2014, at 9:53 AM, Daniel Braniss <danny at cs.huji.ac.il> wrote:
>> 
>>> 
>>> On Aug 15, 2014, at 2:38 PM, Hans Petter Selasky <hps at selasky.org> wrote:
>>> 
>>>> On 08/15/14 12:55, Daniel Braniss wrote:
>>>>> hi all,
>>>>> any idea if there is/will be a driver for:
>>>>> 
>>>>> none3 at pci0:5:0:0:       class=0x020000 card=0x005515b3 chip=0x100315b3 rev=0x00 hdr=0x00
>>>>>    vendor     = 'Mellanox Technologies'
>>>>>    device     = 'MT27500 Family [ConnectX-3]'
>>>>>    class      = network
>>>>>    subclass   = ethernet
>>>>> 
>>>> 
>>>> Hi,
>>>> 
>>>> If you build the kernel using MK_OFED=yes, your hardware is supported by the following modules:
>>>> 
>>>> .if ${MK_OFED} != "no" || defined(ALL_MODULES)
>>>> _mlx4=          mlx4
>>>> _mlx4ib=        mlx4ib
>>>> _mlxen=         mlxen
>>>> _mthca=         mthca
>>>> .endif
>>>> 
>>>> You need to run latest -stable due to some compile issues which have been fixed.
>>>> 
>>>> —HPS
>>> 
>>> hi,
>>> 
>>> I added WITH_MK_OFED=yes to the latest stable but no joy,  it’s sill reported as none.
>>> is there some magic that i’m missing?
>>> thanks,
>>> 	danny
>> 
>> some more info, if it helps:
>> 
>> pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>> pcib0: allocated type 3 (0xdf200000-0xdf3fffff) for rid 20 of pcib5
>> pcib0: allocated type 3 (0xd5000000-0xd57fffff) for rid 24 of pcib5
>> pcib5:   domain            0
>> pcib5:   secondary bus     5
>> pcib5:   subordinate bus   5
>> pcib5:   memory decode     0xdf200000-0xdf3fffff
>> pcib5:   prefetched decode 0xd5000000-0xd57fffff
>> pcib5:   special decode    ISA
>> pci5: <ACPI PCI bus> on pcib5
>> pci5: domain=0, physical bus=5
>> found-> vendor=0x15b3, dev=0x1003, revid=0x00
>>         domain=0, bus=5, slot=0, func=0
>>         class=02-00-00, hdrtype=0x00, mfdev=0
>>         cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
>>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>         intpin=a, irq=15
>>         powerspec 3  supports D0 D3  current D0
>>         MSI-X supports 128 messages in map 0x10
>>         map[10]: type Memory, range 64, base 0xdf300000, size 20, enabled
>> pcib5: allocated memory range (0xdf300000-0xdf3fffff) for rid 10 of pci0:5:0:0
>>         map[18]: type Prefetchable Memory, range 64, base 0xd5000000, size 23, enabled
>> pcib5: allocated prefetch range (0xd5000000-0xd57fffff) for rid 18 of pci0:5:0:0
>> pcib5: matched entry for 5.0.INTA
>> pcib5: slot 0 INTA hardwired to IRQ 35
>> pci5: <network, ethernet> at device 0.0 (no driver attached)
> 
> Hi,
> 
> Did you "kldload mlxen” ?

I can’t find anything that looks like mlxen

danny