[problem] aac0 does not respond

[Vladimir Ermakov]

pluknet wrote:
> 2009/3/24 Vladimir Ermakov <samflanker at gmail.com>:
>   
>> Hello, All
>>
>> Describe my problem:
>> have volume RAID-10 (SAS-HDD x 6) on Adaptec RAID 5805
>>     
>
> You can check status of aac controller with arcconf utility
>
> and post results there..
>
>   
OK
i am try enter command:
# arcconf task start 1 device 0 4 verify

after
viewed logs (note, from kernel config: options AAC_DEBUG=2)
# less /var/log/messages
Mar 24 14:43:24 sys3 kernel: aac0: JobProgress (97) - running (9500000, 
10000000)
Mar 24 14:43:24 sys3 kernel: aac0: (ScsiVerify) handle 4
Mar 24 14:44:10 sys3 kernel: aac0: JobProgress (98) - running (9600000, 
10000000)
Mar 24 14:44:10 sys3 kernel: aac0: (ScsiVerify) handle 4
Mar 24 14:44:55 sys3 kernel: aac0: JobProgress (99) - running (9700000, 
10000000)
Mar 24 14:44:55 sys3 kernel:
Mar 24 14:44:55 sys3 kernel: aac0: (ScsiVerify) handle 4
Mar 24 14:45:41 sys3 kernel: aac0: JobProgress (100) - running (9800000, 
10000000)
Mar 24 14:45:41 sys3 kernel: aac0: (ScsiVerify) handle 4
Mar 24 14:46:28 sys3 kernel: aac0: JobProgress (101) - running (9900000, 
10000000)
Mar 24 14:46:28 sys3 kernel: aac0: (ScsiVerify) handle 4
Mar 24 14:47:15 sys3 kernel: aac0: EventNotify(0)
Mar 24 14:47:15 sys3 kernel: aac0: (23)
Mar 24 14:47:15 sys3 kernel: aac0: JobProgress (102) - success (9900000, 
10000000)
Mar 24 14:47:15 sys3 kernel: aac0: (ScsiVerify) handle 4


# arcconf getlogs 1 EVENT
***
<event Date="1237902930" eventType="FSA_EM_EXPANDED_EVENT" 
eventCode="0x10000000" groupType="FSA_EXE_SCSI_GROUP" groupCode="2" 
priority="3" subType="FSA_EXE_SCSI_SENSE_DATA" subTypeCode="12" cdb="2f 
00 0b 64 d0 00 00 02 00 00 00 00" data="70 00 03 00 00 00 00 00 00 00 00 
00 11 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00" lun="0" 
controllerID="0" channelID="0" deviceID="4"/>
        <event Date="1237902930" eventType="FSA_EM_EXPANDED_EVENT" 
eventCode="0x10000000" groupType="FSA_EXE_SCSI_GROUP" groupCode="2" 
priority="3" subType="FSA_EXE_SCSI_SENSE_DATA" subTypeCode="12" cdb="2f 
00 0b 64 d0 00 00 02 00 00 00 00" data="70 00 03 00 00 00 00 00 00 00 00 
00 11 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00" lun="0" 
controllerID="0" channelID="0" deviceID="4"/>
        <event Date="1237902930" eventType="FSA_EM_EXPANDED_EVENT" 
eventCode="0x10000000" groupType="FSA_EXE_SCSI_GROUP" groupCode="2" 
priority="3" subType="FSA_EXE_SCSI_MEDIUM_ERROR" subTypeCode="5" 
bbrPossibleType="FSA_EXE_SCSI_BBR_POSSIBLE" bbrPossibleCode="2" 
lbaStart="191156224" lbaEnd="191156735" lun="0" controllerID="0" 
channelID="0" deviceID="4"/>
        <event Date="1237902930" eventType="FSA_EM_EXPANDED_EVENT" 
eventCode="0x                                                                                                                                  
16 00 00 00 00 00 04 00 00 00" data="70 00 05 00 00 00 00 00 00 00 00 00 
24 00 0


# arcconf task start 1 device 0 4 verify_fix
Controllers found: 1
Verify with fix of a Hard drive is a long process.

Are you sure you want to continue?
Press y, then ENTER to continue or press ENTER to abort: y

Verifying with fix Channel 0, Device 4.

Command completed successfully.
====================================================

after i am lost my remote system
thx

/Vladimir Ermakov