Problems with SMP in amd64

[Daniel Valencia]

Hello...
 
 I've been trying to update my system in the STABLE branch, and every time I install the new kernel, built using SMP, the system won't boot... as I don't know where the problem could be and it doesn't seem to have been fixed, I thought it a good idea to let you guys know...
 
 The boot process hangs right after detecting the first SATA disk (a maxtor 250GB, ad4 at ata2) and before acknowledging the second SATA disk (same model, ad6 at ata3).  The system boots properly in 6.0-RELEASE using GENERIC.
 
 I'm using a Gigabyte motherboard with nForce4 iDNA chipset, and a dualcore athlon64 3800+ processor.
 
 The system doesn't boot properly under 6.0-RELEASE using SMP either.  Here goes my dmesg...
 
 Copyright (c) 1992-2005 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD 6.0-RELEASE #0: Wed Nov  2 19:07:38 UTC 2005
     root at rat.samsco.home:/usr/obj/usr/src/sys/GENERIC
 ACPI APIC Table: <GBT    AWRDACPI>
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2009.16-MHz K8-class CPU)
   Origin = "AuthenticAMD"  Id = 0x20fb1  Stepping = 1
   Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
   Features2=0x1<SSE3>
   AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
   Hyperthreading: 2 logical CPUs
 real memory  = 939458560 (895 MB)
 avail memory = 895479808 (853 MB)
 ioapic0: Changing APIC ID to 2
 ioapic0 <Version 1.1> irqs 0-23 on motherboard
 acpi0: <GBT AWRDACPI> on motherboard
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi0: Power Button (fixed)
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 pci_link0: <ACPI PCI Link LNK1> irq 5 on acpi0
 pci_link1: <ACPI PCI Link LNK2> irq 5 on acpi0
 pci_link2: <ACPI PCI Link LNK3> irq 11 on acpi0
 pci_link3: <ACPI PCI Link LNK4> on acpi0
 pci_link4: <ACPI PCI Link LNK5> on acpi0
 pci_link5: <ACPI PCI Link LNK6> on acpi0
 pci_link6: <ACPI PCI Link LNK7> irq 10 on acpi0
 pci_link7: <ACPI PCI Link LNK8> on acpi0
 pci_link8: <ACPI PCI Link LUBA> irq 10 on acpi0
 pci_link9: <ACPI PCI Link LUBB> on acpi0
 pci_link10: <ACPI PCI Link LMAC> irq 11 on acpi0
 pci_link11: <ACPI PCI Link LACI> on acpi0
 pci_link12: <ACPI PCI Link LAZA> on acpi0
 pci_link13: <ACPI PCI Link LPMU> on acpi0
 pci_link14: <ACPI PCI Link LMCI> on acpi0
 pci_link15: <ACPI PCI Link LSMB> irq 11 on acpi0
 pci_link16: <ACPI PCI Link LUB2> irq 5 on acpi0
 pci_link17: <ACPI PCI Link LIDE> on acpi0
 pci_link18: <ACPI PCI Link LSID> irq 11 on acpi0
 pci_link19: <ACPI PCI Link LFID> irq 10 on acpi0
 pci_link20: <ACPI PCI Link APC1> irq 0 on acpi0
 pci_link21: <ACPI PCI Link APC2> irq 0 on acpi0
 pci_link22: <ACPI PCI Link APC3> irq 0 on acpi0
 pci_link23: <ACPI PCI Link APC4> irq 0 on acpi0
 pci_link24: <ACPI PCI Link APC5> irq 0 on acpi0
 pci_link25: <ACPI PCI Link APC6> irq 0 on acpi0
 pci_link26: <ACPI PCI Link APC7> irq 0 on acpi0
 pci_link27: <ACPI PCI Link APC8> irq 0 on acpi0
 pci_link28: <ACPI PCI Link APCF> irq 0 on acpi0
 pci_link29: <ACPI PCI Link APCG> irq 0 on acpi0
 pci_link30: <ACPI PCI Link APCH> irq 0 on acpi0
 pci_link31: <ACPI PCI Link APCJ> irq 0 on acpi0
 pci_link32: <ACPI PCI Link APMU> irq 0 on acpi0
 pci_link33: <ACPI PCI Link AAZA> irq 0 on acpi0
 pci_link34: <ACPI PCI Link APCK> irq 0 on acpi0
 pci_link35: <ACPI PCI Link APCS> irq 0 on acpi0
 pci_link36: <ACPI PCI Link APCL> irq 0 on acpi0
 pci_link37: <ACPI PCI Link APCM> irq 0 on acpi0
 pci_link38: <ACPI PCI Link APCZ> irq 0 on acpi0
 pci_link39: <ACPI PCI Link APSI> irq 0 on acpi0
 pci_link40: <ACPI PCI Link APSJ> irq 0 on acpi0
     ACPI-0501: *** Error: Handler for [SystemMemory] returned AE_AML_ALIGNMENT
     ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff0000aa9dc0), AE_AML_ALIGNMENT
     ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff0000aa9dc0), AE_AML_ALIGNMENT
 can't fetch resources for \\_SB_.MEM_ - AE_AML_ALIGNMENT
 cpu0: <ACPI CPU> on acpi0
 acpi_button0: <Power Button> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci_link35: BIOS IRQ 11 for -2145774616.10.INTA is invalid
 pci_link28: BIOS IRQ 10 for -2145774616.11.INTA is invalid
 pci_link36: BIOS IRQ 5 for -2145774616.11.INTB is invalid
 pci_link30: BIOS IRQ 11 for -2145774616.20.INTA is invalid
 pci_link39: BIOS IRQ 11 for -2145774616.14.INTA is invalid
 pci_link40: BIOS IRQ 10 for -2145774616.15.INTA is invalid
 pci_link26: BIOS IRQ 10 for -2145774616.5.INTA is invalid
 pci0: <ACPI PCI bus> on pcib0
 pci0: <memory, RAM> at device 0.0 (no driver attached)
 pci0: <memory, RAM> at device 0.1 (no driver attached)
 pci0: <memory, RAM> at device 0.2 (no driver attached)
 pci0: <memory, RAM> at device 0.3 (no driver attached)
 pci0: <memory, RAM> at device 0.4 (no driver attached)
 pci0: <memory, RAM> at device 0.5 (no driver attached)
 pci0: <memory, RAM> at device 0.6 (no driver attached)
 pci0: <memory, RAM> at device 0.7 (no driver attached)
 pci0: <display, VGA> at device 5.0 (no driver attached)
 pci0: <memory, RAM> at device 9.0 (no driver attached)
 isab0: <PCI-ISA bridge> at device 10.0 on pci0
 isa0: <ISA bus> on isab0
 pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
 pci0: <memory, RAM> at device 10.2 (no driver attached)
 ohci0: <OHCI (generic) USB controller> mem 0xf5104000-0xf5104fff irq 21 at device 11.0 on pci0
 ohci0: [GIANT-LOCKED]
 usb0: OHCI version 1.0, legacy support
 usb0: SMM does not respond, resetting
 usb0: <OHCI (generic) USB controller> on ohci0
 usb0: USB revision 1.0
 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 8 ports with 8 removable, self powered
 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf5100000-0xf51000ff irq 22 at device 11.1 on pci0
 ehci0: [GIANT-LOCKED]
 usb1: EHCI version 1.0
 usb1: companion controller, 8 ports each: usb0
 usb1: <EHCI (generic) USB 2.0 controller> on ehci0
 usb1: USB revision 2.0
 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub1: 8 ports with 8 removable, self powered
 atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 13.0 on pci0
 ata0: <ATA channel 0> on atapci0
 ata1: <ATA channel 1> on atapci0
 atapci1: <GENERIC ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xf5103000-0xf5103fff irq 23 at device 14.0 on pci0
 ata2: <ATA channel 0> on atapci1
 ata3: <ATA channel 1> on atapci1
 atapci2: <GENERIC ATA controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xf5102000-0xf5102fff irq 20 at device 15.0 on pci0
 ata4: <ATA channel 0> on atapci2
 ata5: <ATA channel 1> on atapci2
 pcib1: <ACPI PCI-PCI bridge> at device 16.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xf5000000-0xf50000ff irq 16 at device 6.0 on pci1
 miibus0: <MII bus> on rl0
 rlphy0: <RealTek internal media interface> on miibus0
 rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 rl0: Ethernet address: 00:40:f4:cd:f6:74
 pci1: <multimedia, audio> at device 7.0 (no driver attached)
 fwohci0: <VIA Fire II (VT6306)> port 0xa800-0xa87f mem 0xf5001000-0xf50017ff irq 18 at device 14.0 on pci1
 fwohci0: OHCI version 1.0 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:00:14:85:00:36:63:1b
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 firewire0: <IEEE1394(FireWire) bus> on fwohci0
 fwe0: <Ethernet over FireWire> on firewire0
 if_fwe0: Fake Ethernet address: 02:00:14:36:63:1b
 fwe0: Ethernet address: 02:00:14:36:63:1b
 fwe0: if_start running deferred for Giant
 sbp0: <SBP-2/SCSI over FireWire> on firewire0
 fwohci0: Initiate bus reset
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
 firewire0: bus manager 0 (me)
 pci0: <bridge> at device 20.0 (no driver attached)
 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
 fdc0: [FAST]
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/9 bytes threshold
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 ums0: Microsoft Basic Optical Mouse, rev 1.10/0.00, addr 2, iclass 3/1
 ums0: 3 buttons and Z dir.
 ugen0: vendor 0x046d product 0x08b2, rev 1.10/0.00, addr 3
 Timecounter "TSC" frequency 2009158085 Hz quality 800
 Timecounters tick every 1.000 msec
 acd0: DVDR <TOSHIBA CD/DVDW SDR5372V/TU11> at ata0-master UDMA33
 acd1: CDRW <SONY CD-RW CRX230E/QYS1> at ata0-slave UDMA33
 ad4: 239371MB <Maxtor 6Y250M0 YAR512W0> at ata2-master UDMA33
 ad6: 239372MB <Maxtor 6Y250M0 YAR512W0> at ata3-master UDMA33
 Trying to mount root from ufs:/dev/ad4s2a
 rl0: link state changed to UP
 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com