Problem with FastTrak S150 SX4-M

Søren Schmidt sos at DeepCore.dk
Fri Jan 28 00:07:33 PST 2005


Dave Myron wrote:
> It's not red but it is the PRI_RAID IDE connector. I have the controller set
> to IDE in the BIOS so it should act just as any other IDE controller
> (according to the manual and many other sources).
> 
> I have two hard drives on the primary IDE (not on the controller) and a CD
> drive on the secondary IDE (also not on the controller). Then I have two
> more hard drives on the PRI_RAID channel (which *is* the P-ATA channel on
> the controller). Those two drives are getting the failure (or at least one
> is - see the error messages in my original text). 
> 
> I wish I had an S-ATA drive to test with so that I could verify that it's a
> problem with the P-ATA part of this controller. 

Thats a known problem, its partly fixed in -current, the real fix is in 
the works. Try to take /sys/dev/ata from a fresh -current and let me 
know if that helps you.

-- 

-Søren




More information about the freebsd-hackers mailing list