HP Scanjet 3400 C(SE)

[Vladimír Benc]

I'm posting to freebsd-hardware@ but this list seems to be a little dead. 
:-( so the posting follows to freebsd-hackers@ ....

Hi all,
I have a problem with Hewlett Packard scanner from subject. I tried to get 
it working on trough FreeBSD 4.8REL , 4.9 REL , 4.9 STABLE and
now 4.10 PREREL cvsuped about week ago, but on every version, the scanner 
not attached by system to uscanner0 device, doesn't matter if it
is plugged before booting proces or plugged and unplugged if a machine is 
running. Because the system don't initialize the device, thus
userland programs sane,xsane Niash backend cannot search and use the 
scanner. This peripheral is the last that I must get up working, and
restarting to MSWIN and scanning a few pages and restarting back to FBSD 
isn't much confortable :-))

PS: this scanner have a USB/Parallel buses, but I don't know how to 
configure Niash to get working through lpt and on their website, they
wrote, that HP3400CSE is totally untested trough ParallelBus ( it seems to 
be in Makefile, that depend on a IEEE1284? lib .h eaders files,
but I dont find this lib for FBSD (and not sure if this lib can work 
trough linux ABI)

so, there is stdout from dmesg,pciconf and usbdevs... if you can full 
listings, please write.

May 11 10:35:57 vlada /kernel: uhci0: <VIA 83C572 USB controller> port 
0xe000-0xe01f irq 11 at device 16.0 on pci0
May 11 10:35:57 vlada /kernel: usb0: <VIA 83C572 USB controller> on uhci0
May 11 10:35:57 vlada /kernel: usb0: USB revision 1.0
May 11 10:35:57 vlada /kernel: uhub0: VIA UHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
May 11 10:35:57 vlada /kernel: uhub0: 2 ports with 2 removable, self 
powered
May 11 10:35:57 vlada /kernel: uhci1: <VIA 83C572 USB controller> port 
0xe400-0xe41f irq 10 at device 16.1 on pci0
May 11 10:35:57 vlada /kernel: usb1: <VIA 83C572 USB controller> on uhci1
May 11 10:35:57 vlada /kernel: usb1: USB revision 1.0
May 11 10:35:57 vlada /kernel: uhub1: VIA UHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
May 11 10:35:57 vlada /kernel: uhub1: 2 ports with 2 removable, self 
powered
May 11 10:35:57 vlada /kernel: pci0: <USB controller> at 16.3 irq 5
________________________
May 10 09:11:24 vlada /kernel: uscanner0: Hewlett Packard ScanJet 3400cse, 
rev 1.00/0.00, addr 2
May 10 09:11:24 vlada /kernel: uscanner0: setting config no failed
May 10 09:11:24 vlada /kernel: device_probe_and_attach: uscanner0 attach 
returned 6
May 10 09:11:24 vlada /kernel: uhub0: port 1, set config at addr 2 failed
May 10 09:11:24 vlada /kernel: uhub0: device problem, disabling port 1
________________________
uhci0 at pci0:16:0:        class=0x0c0300 card=0x71201462 chip=0x30381106 
rev=0x80 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
uhci1 at pci0:16:1:        class=0x0c0300 card=0x71201462 chip=0x30381106 
rev=0x80 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
none1 at pci0:16:3:        class=0x0c0320 card=0x71201462 chip=0x31041106 
rev=0x82 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT6202 USB 2.0 Enhanced Host Controller'
     class    = serial bus
     subclass = USB
________________________
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
VIA(0x0000), rev 1.00
   uhub0
  port 1 powered
  port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
VIA(0x0000), rev 1.00
   uhub1
  port 1 powered
  port 2 powered
________________________


Thanks for reply
Vladimir Benc