HEADSUP.. USB MFC coming..

[Julian Elischer]

On Sun, 29 Feb 2004, Dmitry Morozovsky wrote:

> On Fri, 27 Feb 2004, Julian Elischer wrote:
> 
> JE> I plan to commit the MFC at http://www.josef-k.net/freebsd/
> JE> (the latest one) in the next couple of days. If you really care about
> JE> USB in 4.10 you might do well to test this on your equipment,
> JE> ESPECIALLY if you have unusual devices. Let me know of both successes
> JE> and failures please.. If I hear nothing I won't know if it's because
> JE> no-one tested it or it was just without problems..
> JE>
> JE> Please also check these same devices without the patch BEFORE you let me
> JE> know of any failures so that we can tell if they are truely caused by
> JE> the patch..
> 
> Well, my main headache (SONY Clie SJ20) is now in a bit different state; before
> (at 4.9p1) it failed to attach with
> 
> ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
> ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
> ucom0: init failed, STALLED
> device_probe_and_attach: ucom0 attach returned 6
> ugen0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
> 
> now it is correctly identified (after HotSync activation)  as
> 
> ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
> ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
> 
> Controller /dev/usb0:
> addr 1: low speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
>  port 1 powered
>  port 2 addr 2: low speed, self powered, config 1, Palm Handheld(0x0066), Palm, Inc.(0x054c), rev 1.00
> 
> However, I still can't figure out how to sync, as dlpsh can't attach to
> /dev/ucom before activatyng Sync, and never goes to the shell prompt when


shouldn't it be /dev/ucom0?
(assuming it exists)

> statring in the middle of sync process. Googling does not help much,
> unfortunately.
> 
> Two other USB devices I have are USB Generic storage (CF reader and MP3
> player), and they seem to keep work smoothly.
> 
> I had I/O errors and hangups with cheap MemoryStick reader before,
> but do not have it by hand to quick check. Hope to check tomorrow.
> 

I'll go ahead with the MFC but I'll
try handle these reports afterwards...

> Thanks for your work!



> 
> Sincerely,
> D.Marck                                     [DM5020, MCK-RIPE, DM3-RIPN]
> ------------------------------------------------------------------------
> *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck at rinet.ru ***
> ------------------------------------------------------------------------
>