HP psc 750 on FreeBSD 4.8

[Bernd Walter]

On Wed, Apr 16, 2003 at 03:36:03AM -0500, nbari at unixmexico.com wrote:
> Hi all, i have an HP psc 750 USB printer
> 
> Any idea on how configure this printer to make it work on FreeBSD ?
> 
> i have this lines on my kernel:
> 
> device          usb
> device          uhci
> device          ulpt
> device          uscanner
> device          ugen
> 
> 
> dmesg give me this:
> 
> ugen0: Hewlett-Packard PSC 750, rev 1.10/1.00, addr 2

Can you please install http://www.cosmo-project.de/~bernd/usbutil.tgz
and mail the usbctl output.

> usbdevs -v give me this:
> Controller /dev/usb0:
> addr 1: self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev
> 1.00
>  port 1 addr 2: power 2 mA, config 1, PSC 750(0x1411),
> Hewlett-Packard(0x03f0), rev 1.00
>  port 2 addr 3: low speed, self powered, config 1, ASC495
> Speakers(0xff05), ALTEC LANSING Multimedia (0x04d2), rev 0.00
> 
> 
> when trying to run an lptest > /dev/ulpt0 i get an : /dev/ulpt0: Device
> not configured.
> 
> and when runing lptest > /dev/ugen0 nothing happens.

ugen is a generic driver for raw device access.

-- 
B.Walter                   BWCT                http://www.bwct.de
ticso at bwct.de                                  info at bwct.de