Brasero for FreeBSD CAM

[Koop Mast]

On Sun, 2008-01-27 at 14:33 -0500, Joe Marcus Clarke wrote:
> On Sun, 2008-01-27 at 18:17 +0100, Koop Mast wrote:
> > On Thu, 2008-01-24 at 17:04 -0500, Joe Marcus Clarke wrote:
> > > It's been a while, but I finished a very rough port of brasero's medium
> > > backend to FreeBSD CAM.  I borrowed some of Jean-Yves' code from HAL,
> > > and extended it.  Basically, I've been reading the MMC6 spec a lot
> > > lately.
> > > 
> > > The port is rough in that I use a lot of magic offsets based on the MMC
> > > spec.  This makes reading and maintenance hard.  I just wanted to see if
> > > this could be done.  Cleanup can happen later.  I also have not done
> > > more than a build test.  
> > > 
> > > If you do want to play with this, you should run brasero in a debug mode
> > > so that all output can be captured.  While cdrecord should still be used
> > > to burn the media, coasters should be expected early on.
> > > 
> > > http://www.marcuscom.com/downloads/brasero.diff
> > > 
> > > Joe
> > > 
> > I tried this on FreeBSD 6/i386 with gnome 2.20. And it doesn't seem to
> > be able to pick up blank cd/dvd's. While a icon for the black cd/dvd
> > apears on my desktop.
> 
> What does the debug output from brasero say?
> 
> Joe
> 
The 2 lines below are when I insert a blank DVD.

(brasero:903): BraseroBurn-DEBUG: At burn-medium-cam.c:1775: Trying to
create BRASERCDROM for device /dev/cd0
(brasero:903): BraseroBurn-DEBUG: At burn-medium-cam.c:1778: Creation failed

Complete log is here
http://rainbow-runner.nl/~kwm/freebsd/brasero-error.txt

-Koop