kqread problem

Thu Mar 16 09:56:14 UTC 2006

Hello,
I hope I am a adresing to the right person(s).
Just installed FreeBSD  6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov  3
09:36:13 UTC 2005    
root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC  i386.
The problem is that Firefox hungs up in a kqread state when I try to
open it. I upgraded to version 1.5.0.1 and still the same problem.
This doesn`t happen all the time... after the boot the first time I
try to open it works very fast and when I close it and open it again
top gives me a kqread and hungs up to ~30 seconds give or take.
I think I did a mistake somewhere don't know if this is the cause when
I tried to upgrade to firefox 1.5 I did
portsupgrade -R firefox and that calculed to be 230 packeges so I
stoped it and did a cvsup then cd /usr/ports/www/firefox and make
install.
No when I try to do a portsupgrade -a  first time something about an
error and the I deleted all the /var/db pkg ports and did a portsnap
fetch and update and now says at portsupgrade that nothing is to
upgrade.
But the error with kqread was before this.

Here's my dmesg if it helps :

[] /home> dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP (1921.03-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM

OV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory  = 503250944 (479 MB)
avail memory = 478916608 (456 MB)
mptable_probe: MP Config Table has bad signature: rl-F
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.2.INTA
$PIR: No matching entry for 0.2.INTB
$PIR: No matching entry for 0.2.INTC
$PIR: No matching entry for 0.4.INTA
$PIR: No matching entry for 0.5.INTA
$PIR: No matching entry for 0.6.INTA
$PIR: No matching entry for 0.13.INTA
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe1087000-0xe1087fff irq
11 at devic                                               e 2.0 on
pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe1082000-0xe1082fff irq 5
at device                                                2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe1083000-0xe10830ff
irq 11 at d                                               evice 2.2 on
pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xd000-0xd007 mem
0xe1086000-                                               0xe1086fff
irq 11 at device 4.0 on pci0
nve0: Ethernet address 00:30:1b:38:88:7c
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nve0: Ethernet address: 00:30:1b:38:88:7c
nve0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <simple comms> at device 6.0 (no driver attached)
atapci0: <nVidia nForce2 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,                                        
      0x376,0xf000-0xf00f at device 9.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
fwohci0: <1394 Open Host Controller Interface> mem
0xe1084000-0xe10847ff,0xe1085                                         
     000-0xe108503f irq 5 at device 13.0 on pci0
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:30:1b:30:1b:38:88:e0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:1b:38:88:e0
fwe0: Ethernet address: 02:30:1b:38:88:e0
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci3: <PCI bus> on pcib2
$PIR: ROUTE_INTERRUPT failed.
nvidia0: <GeForce4 MX Integrated GPU> mem
0xde000000-0xdeffffff,0xd4000000-0xd7f                                
              fffff,0xd8000000-0xd807ffff irq 5 at device 0.0 on pci3
nvidia0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd57ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 1921033083 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100
acd0: CDRW <PHILIPS PBRW5232L/Q5S2> at ata1-master UDMA33
acd1: DVDR <ASUS DRW-1608P2/1.17> at ata1-slave UDMA66
Trying to mount root from ufs:/dev/ad0s1a
nve0: link state changed to UP
pid 609 (ruby18), uid 0: exited on signal 4 (core dumped)
pcm0: <nVidia nForce2> port 0xd400-0xd4ff,0xd800-0xd87f mem
0xe1080000-0xe1080ff                                               f
irq 5 at device 6.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC650 AC97 Codec>
Out of ktrace request objects.
[] /home>

Thanks in advance