bakery configure loop
Joe Marcus Clarke
marcus at marcuscom.com
Wed Nov 26 22:53:20 PST 2003
On Thu, 2003-11-27 at 01:34, Kris Kennaway wrote:
> I'm seeing this on bento:
I've marked it as IGNORE for now. This port is almost two years old,
and bland said he'd update it to the GNOME 2 version when the freeze
lifts.
Joe
>
> ===> Extracting for bakery-1.0.2
> >> Checksum OK for bakery-1.0.2.tar.gz.
> ===> Patching for bakery-1.0.2
> ===> Applying FreeBSD patches for bakery-1.0.2
> ===> bakery-1.0.2 depends on executable: gmake - found
> ===> bakery-1.0.2 depends on file: /usr/local/libexec/libtool13/libtool - found
> ===> bakery-1.0.2 depends on file: /usr/local/bin/perl5.6.1 - found
> ===> bakery-1.0.2 depends on shared library: gnomemm-1.2.10 - found
> ===> bakery-1.0.2 depends on shared library: X11.6 - found
> ===> Configuring for bakery-1.0.2
> creating cache ./config.cache
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking whether the C compiler (cc -O -pipe -mcpu=pentiumpro ) works... yes
> checking whether the C compiler (cc -O -pipe -mcpu=pentiumpro ) is a cross-compiler... no
> checking whether we are using GNU C... yes
> checking whether cc accepts -g... yes
> checking for c++... c++
> checking whether the C++ compiler (c++ -O -pipe -mcpu=pentiumpro ) works... yes
> checking whether the C++ compiler (c++ -O -pipe -mcpu=pentiumpro ) is a cross-compiler... no
> checking whether we are using GNU C++... yes
> checking whether c++ accepts -g... yes
> checking host system type... i386-portbld-freebsd5.2
> checking build system type... i386-portbld-freebsd5.2
> checking for ranlib... ranlib
> checking for ld used by GCC... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> updating cache ./config.cache
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... no
> checking if cc static flag -static works... -static
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking whether the linker (/usr/bin/ld) supports shared libraries... yes
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/bin/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd5.2 ld.so
> checking if libtool supports shared libraries... yes
>
> *** Warning: the command libtool uses to detect shared libraries,
> *** /usr/bin/file, produces output that libtool cannot recognize.
> *** The result is that libtool may fail to recognize shared libraries
> *** as such. This will affect the creation of libtool libraries that
> *** depend on shared libraries, but programs linked with such libtool
> *** libraries will work regardless of this problem. Nevertheless, you
> *** may want to report the problem to your system manager and/or to
> *** bug-libtool at gnu.org
>
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> loading cache ./config.cache
> checking whether build environment is sane... yes
> checking how to run the C preprocessor... cc -E
> checking for POSIXized ISC... no
> checking for ANSI C header files... yes
> checking for working const... yes
> checking for inline... inline
> checking for off_t... yes
> checking for size_t... yes
> checking for working alloca.h... no
> checking for alloca... yes
> checking for unistd.h... yes
> checking for getpagesize... yes
> checking for working mmap... yes
> checking for argz.h... no
> checking for limits.h... yes
> checking for locale.h... yes
> checking for nl_types.h... yes
> checking for malloc.h... no
> checking for string.h... yes
> checking for unistd.h... (cached) yes
> checking for sys/param.h... yes
> checking for getcwd... yes
> checking for munmap... yes
> checking for putenv... yes
> checking for setenv... yes
> checking for setlocale... yes
> checking for strchr... yes
> checking for strcasecmp... yes
> checking for strdup... yes
> checking for __argz_count... no
> checking for __argz_stringify... no
> checking for __argz_next... no
> checking for stpcpy... yes
> checking for LC_MESSAGES... yes
> checking whether NLS is requested... yes
> checking whether included gettext is requested... no
> checking for libintl.h... yes
> checking for gettext in libc... no
> checking for bindtextdomain in -lintl... yes
> checking for gettext in libintl... checking for gettext in -lintl... yes
> yes
> checking for msgfmt... /usr/local/bin/msgfmt
> checking for dcgettext... no
> checking for gmsgfmt... /usr/local/bin/msgfmt
> checking for xgettext... /usr/local/bin/xgettext
> checking for gtk-config... /usr/X11R6/bin/gtk-config
> checking for GTK - version >= 1.2.8... yes
> checking for gtkmm-config... /usr/X11R6/bin/gtkmm-config
> checking for GTK-- - version >= 1.2.5... yes
> checking for gnome-config... /usr/X11R6/bin/gnome-config
> checking if /usr/X11R6/bin/gnome-config works... yes
> checking for orbit-config... /usr/local/bin/orbit-config
> checking for orbit-idl... /usr/local/bin/orbit-idl
> checking for working ORBit environment... yes
> checking for gnorba libraries... yes
> WARNING: `aclocal' is missing on your system. You should only need it if
> you modified `acinclude.m4' or `configure.in'. You might want
> to install the `Automake' and `Perl' packages. Grab them from
> any GNU archive site.
> checking what warning flags to pass to the C compiler... -Wall -Wunused
> checking what language compliance flags to pass to the C compiler...
> checking for gnome-config... (cached) /usr/X11R6/bin/gnome-config
> checking for Gnome-- - version >= 1.2.1... yes
> updating cache ./config.cache
> creating ./config.status
> creating Makefile
> creating bakery-config
> creating scripts/Makefile
> creating macros/Makefile
> creating bakery/Makefile
> creating bakery/App/Makefile
> creating bakery/Document/Makefile
> creating bakery/FileSelection/Makefile
> creating bakery/View/Makefile
> creating examples/Makefile
> creating examples/FileSelection/Makefile
> creating examples/WithoutDoc/Makefile
> creating examples/WithDoc/Makefile
> creating examples/WithDocView/Makefile
> creating examples/WithDocViewComposite/Makefile
> creating intl/Makefile
> creating po/Makefile.in
> creating bakery.spec
> creating config.h
> ===> Building for bakery-1.0.2
> cd . && /tmp/a/ports/x11-toolkits/bakery/work/bakery-1.0.2/scripts/missing automake --gnu --include-deps Makefile
> WARNING: `automake' is missing on your system. You should only need it if
> you modified `Makefile.am', `acinclude.m4' or `configure.in'.
> You might want to install the `Automake' and `Perl' packages.
> Grab them from any GNU archive site.
> cd . && /tmp/a/ports/x11-toolkits/bakery/work/bakery-1.0.2/scripts/missing autoconf
> WARNING: `autoconf' is missing on your system. You should only need it if
> you modified `configure.in'. You might want to install the
> `Autoconf' and `GNU m4' packages. Grab them from any GNU
> archive site.
> /bin/sh ./config.status --recheck
> running /bin/sh ./configure --x-libraries=/usr/X11R6/lib --x-includes=/usr/X11R6/include --localstatedir=/usr/X11R6/share/gnome --datadir=/usr/X11R6/share/gnome --with-html-dir=/usr/X11R6/share/doc --disable-gtk-doc --with-gconf-source=xml::/usr/X11R6/etc/gconf/gconf.xml.defaults --prefix=/usr/X11R6 i386-portbld-freebsd5.2 --no-create --no-recursion
> loading cache ./config.cache
> checking for a BSD compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking whether make sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... (cached) cc
> checking whether the C compiler (cc -O -pipe -mcpu=pentiumpro ) works... yes
> checking whether the C compiler (cc -O -pipe -mcpu=pentiumpro ) is a cross-compiler... no
> checking whether we are using GNU C... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for c++... (cached) c++
> checking whether the C++ compiler (c++ -O -pipe -mcpu=pentiumpro ) works... yes
> checking whether the C++ compiler (c++ -O -pipe -mcpu=pentiumpro ) is a cross-compiler... no
> checking whether we are using GNU C++... (cached) yes
> checking whether c++ accepts -g... (cached) yes
> checking host system type... i386-portbld-freebsd5.2
> checking build system type... i386-portbld-freebsd5.2
> checking for ranlib... (cached) ranlib
> checking for ld used by GCC... (cached) /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... (cached) yes
> checking for BSD-compatible nm... (cached) /usr/bin/nm -B
> checking whether ln -s works... (cached) yes
> updating cache ./config.cache
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... no
> checking if cc static flag -static works... -static
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking whether the linker (/usr/bin/ld) supports shared libraries... yes
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/bin/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd5.2 ld.so
> checking if libtool supports shared libraries... yes
>
> *** Warning: the command libtool uses to detect shared libraries,
> *** /usr/bin/file, produces output that libtool cannot recognize.
> *** The result is that libtool may fail to recognize shared libraries
> *** as such. This will affect the creation of libtool libraries that
> *** depend on shared libraries, but programs linked with such libtool
> *** libraries will work regardless of this problem. Nevertheless, you
> *** may want to report the problem to your system manager and/or to
> *** bug-libtool at gnu.org
>
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> loading cache ./config.cache
> checking whether build environment is sane... yes
> checking how to run the C preprocessor... (cached) cc -E
> checking for POSIXized ISC... no
> checking for ANSI C header files... (cached) yes
> checking for working const... (cached) yes
> checking for inline... (cached) inline
> checking for off_t... (cached) yes
> checking for size_t... (cached) yes
> checking for working alloca.h... (cached) no
> checking for alloca... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... (cached) yes
> checking for working mmap... (cached) yes
> checking for argz.h... (cached) no
> checking for limits.h... (cached) yes
> checking for locale.h... (cached) yes
> checking for nl_types.h... (cached) yes
> checking for malloc.h... (cached) no
> checking for string.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for sys/param.h... (cached) yes
> checking for getcwd... (cached) yes
> checking for munmap... (cached) yes
> checking for putenv... (cached) yes
> checking for setenv... (cached) yes
> checking for setlocale... (cached) yes
> checking for strchr... (cached) yes
> checking for strcasecmp... (cached) yes
> checking for strdup... (cached) yes
> checking for __argz_count... (cached) no
> checking for __argz_stringify... (cached) no
> checking for __argz_next... (cached) no
> checking for LC_MESSAGES... (cached) yes
> checking whether NLS is requested... yes
> checking whether included gettext is requested... no
> checking for libintl.h... (cached) yes
> checking for gettext in libc... (cached) no
> checking for bindtextdomain in -lintl... (cached) yes
> checking for gettext in libintl... (cached) yes
> checking for msgfmt... (cached) /usr/local/bin/msgfmt
> checking for dcgettext... (cached) no
> checking for gmsgfmt... (cached) /usr/local/bin/msgfmt
> checking for xgettext... (cached) /usr/local/bin/xgettext
> checking for gtk-config... (cached) /usr/X11R6/bin/gtk-config
> checking for GTK - version >= 1.2.8... yes
> checking for gtkmm-config... (cached) /usr/X11R6/bin/gtkmm-config
> checking for GTK-- - version >= 1.2.5... yes
> checking for gnome-config... (cached) /usr/X11R6/bin/gnome-config
> checking if /usr/X11R6/bin/gnome-config works... yes
> checking for orbit-config... (cached) /usr/local/bin/orbit-config
> checking for orbit-idl... (cached) /usr/local/bin/orbit-idl
> checking for working ORBit environment... (cached) yes
> checking for gnorba libraries... (cached) yes
> WARNING: `aclocal' is missing on your system. You should only need it if
> you modified `acinclude.m4' or `configure.in'. You might want
> to install the `Automake' and `Perl' packages. Grab them from
> any GNU archive site.
> checking what warning flags to pass to the C compiler... -Wall -Wunused
> checking what language compliance flags to pass to the C compiler...
> checking for gnome-config... (cached) /usr/X11R6/bin/gnome-config
> checking for Gnome-- - version >= 1.2.1... yes
> creating ./config.status
> cd . \
> && CONFIG_FILES=Makefile CONFIG_HEADERS= /bin/sh ./config.status
> creating Makefile
> cd . && /tmp/a/ports/x11-toolkits/bakery/work/bakery-1.0.2/scripts/missing automake --gnu --include-deps Makefile
> WARNING: `automake' is missing on your system. You should only need it if
> you modified `Makefile.am', `acinclude.m4' or `configure.in'.
> You might want to install the `Automake' and `Perl' packages.
> Grab them from any GNU archive site.
> cd . && /tmp/a/ports/x11-toolkits/bakery/work/bakery-1.0.2/scripts/missing autoconf
> WARNING: `autoconf' is missing on your system. You should only need it if
> you modified `configure.in'. You might want to install the
> `Autoconf' and `GNU m4' packages. Grab them from any GNU
> archive site.
> /bin/sh ./config.status --recheck
> running /bin/sh ./configure --x-libraries=/usr/X11R6/lib --x-includes=/usr/X11R6/include --localstatedir=/usr/X11R6/share/gnome --datadir=/usr/X11R6/share/gnome --with-html-dir=/usr/X11R6/share/doc --disable-gtk-doc --with-gconf-source=xml::/usr/X11R6/etc/gconf/gconf.xml.defaults --prefix=/usr/X11R6 i386-portbld-freebsd5.2 --no-create --no-recursion
> loading cache ./config.cache
> checking for a BSD compatible install... (cached) /usr/bin/install -c
> ...
> [Lather, rinse, repeat ad infinitum]
>
> Kris
--
PGP Key : http://www.marcuscom.com/pgp.asc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20031127/56fff931/attachment.bin
More information about the freebsd-gnome
mailing list