Sony DRX-510UL CD/DVD burner: probe failed for 1 node

[Hidetoshi Shimokawa]

At Sun, 7 Dec 2003 12:36:35 -0500 (EST),
Judd Storrs wrote:
> I am having trouble with a Sony firewire DVD burner though, has anybody
> had success with the Sony DRX-510UL DVD+/-R/RW drive using
> firewire/i.LINK? I'm now running current from 12/06/2003 with aio kernel
> module. [The drive isn't listed by fwcontrol without aio.] When I plug the
> drive I observe the following in dmesg (with aio.ko loaded/full dmesg
> attached):
> 
> fwohci0: BUS reset
> fwohci0: node_id=0xc000ffc1, gen=3, CYCLEMASTER mode
> firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
> firewire0: bus manager 1 (me)
> fwohci0: BUS reset
> fwohci0: node_id=0xc000ffc1, gen=4, CYCLEMASTER mode
> firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
> firewire0: bus manager 1 (me)
> firewire0: New S400 device ID:080046090009e518
> firewire0: split transaction timeout dst=0xffc0 tl=0xa state=3
> node0: resp=60 addr=0x418
> probe failed for 1 node
> 
> fwcontrol reports:
> 
> 2 devices (info_len=2)
> node        EUI64        status
>    1  0x0800285602000333      0
>   -1  0x080046090009e518      0
> 
> [0x0800285602000333 = Adaptec DuoConnect PCIMCIA firewire/usb2]

Could you send me the output of 'fwcontrol -c 0' and dmesg without aio
module?
What happens if you initiate a bus reset manually by 'fwcontrol -r'?

Thanks,

/\ Hidetoshi Shimokawa
\/  simokawa at sat.t.u-tokyo.ac.jp
PGP public key: http://www.sat.t.u-tokyo.ac.jp/~simokawa/pgp.html