STM32 not identified

[bmelo]

Still not working. Do I need to edit devfs.conf? My devfs.conf actually:

# Allow all USB Devices to be mounted
perm    /dev/da0        0666
perm    /dev/da1        0666
perm    /dev/da2        0666
perm    /dev/da3        0666
perm    /dev/da4        0666
perm    /dev/da5        0666

# Misc other devices
perm    /dev/pass0      0666
perm    /dev/xpt0       0666
perm    /dev/uscanner0  0666
perm    /dev/video0     0666
perm    /dev/tuner0     0666


Sent from ProtonMail, Swiss-based encrypted email.

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, 16 de March de 2020 às 17:02, Ian Lepore <ian at freebsd.org> wrote:

> On Mon, 2020-03-16 at 16:46 +0000, bmelo wrote:
>
> > Here is my devfs.rules:
> > [devfsrules_common=7]
> > add path 'ad[0-9]\' mode 666
> > add path 'ada[0-9]\' mode 666add path 'da[0-9]\' mode 666
> > add path 'acd[0-9]\' mode 666add path 'cd[0-9]\' mode 666
> > add path 'cuaU[0-9]\' mode 666add path 'mmcsd[0-9]\' mode 666
> > add path 'pass[0-9]\' mode 666add path 'xpt[0-9]\' mode 666
> > add path 'ugen[0-9]\' mode 666add path 'usbctl' mode 666
> > add path 'usb/\' mode 666
> > add path 'ttyU[0-9]\' mode 666add path 'lpt[0-9]\' mode 666
> > add path 'ulpt[0-9]\' mode 666add path 'unlpt[0-9]\' mode 666
> > add path 'fd[0-9]\' mode 666add path 'uscan[0-9]\' mode 666
> > add path 'video[0-9]\' mode 666add path 'tuner[0-9]' mode 666
> > add path 'dvb/\' mode 666add path 'cx88*' mode 0660
> > add path 'iicdev*' mode 0660
> > add path 'uvisor[0-9]*' mode 0660
>
> I suspect the escaped wildcards are causing a problem, try using
> "cuaU*" instead of "cuaU[0-9]\*" (and likewise for all the rules, I
> don't think there is any device that puts a literal * in the devfs
> name).
>
> -- Ian
>
> > Sent from ProtonMail, Swiss-based encrypted email.
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Monday, 16 de March de 2020 s 13:23, Ian Lepore ian at freebsd.org
> > wrote:
> >
> > > On Mon, 2020-03-16 at 12:23 +0000, bmelo via freebsd-embedded
> > > wrote:
> > >
> > > > Hi, I have a STM32 Nucleo board and installed stlink from ports
> > > > here.
> > > > But all the time I run st-util command I get the message:
> > > > WARN usb.c: Couldn't find any ST-Link/V2 devices
> > > > The Nucleo creates cuaU0 and ttyU0 in /dev. It seems like a
> > > > permission problem, but I have no idea how to fix that. I already
> > > > tried to edit /etc/devfs.rules and the problem persists.
> > > > /dev/cuaU0
> > > > is uucp:dialer and ttyU0 is root:wheel.
> > > > Any idea?
> > >
> > > You didn't saywhat you tried with devfs.rules. This is what I use
> > > (because I am the only user of this machine, so security is not a
> > > problem; these might not be good for a shared machine):
> > > [localrules=10]
> > > add path "ttyU*" mode 0666
> > > add path "cuaU*" mode 0666
> > > add path "ugen*" mode 0666
> > > add path "usb/*" mode 0666
> > > add path "usb" mode 0755
> > > -- Ian