CURRENT: PCengines APU2C4 SanDisk UltraFit USB 3.0 32G failure: error 19
O. Hartmann
ohartman at zedat.fu-berlin.de
Mon Sep 26 20:15:15 UTC 2016
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Am Sat, 17 Sep 2016 01:29:49 +0200
"O. Hartmann" <ohartman at zedat.fu-berlin.de> schrieb:
> Trying to use a SanDisk 32GB UltraFit USB 3.0 Flash drive as boot device with a PCengine
> APU2C4, booting recent CURRENT (r305893) fails with error 19:
>
> [...]
> ugen1.2: <vendor 0x0438> at usbus1
> uhub2 on uhub1
> uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
> ugen0.2: <SanDisk> at usbus0
> umass0 on uhub0
> umass0: <SanDisk Ultra Fit, class 0/0, rev 2.10/1.00, addr 1> on usbus0
> umass0: SCSI over Bulk-Only; quirks = 0xc100
> umass0:2:0: Attached to scbus2
> uhub2: 4 ports with 4 removable, self powered
> mountroot: waiting for device /dev/ufs/Rs1a...
> Mounting from ufs:/dev/ufs/Rs1a failed with error 19.
>
> The very same NanoBSD image put to SD or USB 2.0 flash drive does boot!
>
> I tried tinyLinux with the same flash drive and it worked.
>
> Are there any hints how to make this flash drive work?
>
> Kind regards,
>
> oh
Plugging in the USB 3 flash drive, I get this message on the console, maybe it tells
somebody enlightened more than me ...:
[...]
umass0 on uhub0
umass0: <SanDisk Ultra Fit, class 0/0, rev 3.00/1.00, addr 1> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:2:0: Attached to scbus2
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <SanDisk Ultra Fit 1.00> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 4C530001010504121064
da0: 400.000MB/s transfers
da0: 29327MB (60062500 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Steering write from 0 kBps to 300000 kBps
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAEBCAAGBQJX6YHKAAoJEOgBcD7A/5N8OWAIAK6ENbrwiCx+ui4yq2TvRiqe
acQjf78NlFeNJV4mSx7iwIai7L/4HItW72sKWd0DZna0Rr/pXrFpIEKWWheTyObv
y8mEsx2DLzhICrI5Dmz3A5exkrIGS3ipyuNKrYY/N2/YPWKQMQmaa88N4JgiS0q3
ImeavTek+ArcEocmEanC/mc/I1SYeW1gSiesY8JRPCWX/UG8U+59qTtmlvqCyK/F
kPoN76hSrSGdKQmxA0gsnWw/udEk1xhTq2Xazw9mCAdx1FnIBf9DKqaI4MasK2iS
7co+wAd6JkKkDzbqWd45/FZ3Ulu20vmNbx2tACnWsgma4RXdkS7iqDUTkcYdR2o=
=+yek
-----END PGP SIGNATURE-----
More information about the freebsd-embedded
mailing list