Dlink DIR-825 B1 trial

[hiren panchasara]

On Sat, Sep 28, 2013 at 4:37 PM, Nenhum_de_Nos <matheus at eternamente.info>wrote:

>
>
> hiren panchasara <hiren.panchasara at gmail.com> wrote:
> >On Sat, Sep 28, 2013 at 1:17 PM, Nenhum_de_Nos
> ><matheus at eternamente.info>wrote:
> >
> >>
> >> <skip>
> >
> >>
> >> same outcome:
> >>
> >
> >The patch I suggested what to fix:
> >"[zone: mbuf_cluster] kern.ipc.nmbclusters limit reached" - which I am
> >not
> >seeing in your logs. Do you still see that?
> >
> >
> >> th1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
> >> wlan0: Ethernet address: 20:11:91:53:59:44
> >> wlan1: Ethernet address: 59:44:91:53:20:11
> >> ar5416StopDmaReceive: dma failed to stop in 10ms
> >> AR_CR=0x00000024
> >> AR_DIAG_SW=0x42000020
> >> ar5416StopDmaReceive: dma failed to stop in 10ms
> >> AR_CR=0x00000024
> >> AR_DIAG_SW=0x42000020
> >> ar5416StopDmaReceive: dma failed to stop in 10ms
> >> AR_CR=0x00000024
> >> AR_DIAG_SW=0x42000020
> >> ar5416StopDmaReceive: dma failed to stop in 10ms
> >> AR_CR=0x00000024
> >> AR_DIAG_SW=0x42000020
> >> ar5416StopDmaReceive: dma failed to stop in 10ms
> >> AR_CR=0x00000024
> >> AR_DIAG_SW=0x42000020
> >> ar5416StopDmaReceive: dma failed to stop in 10ms
> >> AR_CR=0x00000024
> >> AR_DIAG_SW=0x42000020
> >> ar5416StopDmaReceive: dma failed to stop in 10ms
> >> AR_CR=0x00000024
> >> AR_DIAG_SW=0x42000020
> >> bridge0: Ethernet address: 5e:35:c9:37:f6:d1
> >> ar5416StopDmaReceive: dma failed to stop in 10ms
> >> AR_CR=0x00000024
> >> AR_DIAG_SW=0x42000020
> >>
> >
> > "ar5416StopDmaReceive" errors are likely harmless, afaik.
> >
> >wlan1: start 60 second CAC timer on channel 52 (5260 MHz)
> >> # wlan1: CAC timer on channel 52 (5260 MHz) expired; no radar
> >detected
> >> wlan1: ieee80211_new_state_locked: pending CAC -> RUN transition lost
> >> lock order reversal: (sleepable after non-sleepable)
> >>  1st 0xc70a3014 ath1_com_lock (ath1_com_lock) @
> >>
> >>
>
> >/root/work/freebsd/head/src/sys/modules/wlan/../../net80211/ieee80211_scan.c:686
> >>  2nd 0x8036dff8 user map (user map) @
> >> /root/work/freebsd/head/src/sys/vm/vm_glue.c:168
> >> KDB: stack backtrace:
> >> db_trace_thread+30 (?,?,?,?) ra c059989000000018 sp 0 sz 0
> >> db_trace_self+1c (?,?,?,?) ra c05998a800000018 sp 0 sz 0
> >> 8007ad18+34 (?,?,?,?) ra c05998c0000001a0 sp 0 sz 0
> >> kdb_backtrace+44 (?,?,?,?) ra c0599a6000000018 sp 0 sz 0
> >> 801704b8+34 (?,?,?,?) ra c0599a7800000020 sp 0 sz 0
> >> witness_checkorder+b0c (?,?,802f97d4,a8) ra c0599a9800000050 sp 0 sz
> >1
> >> _sx_slock+c0 (?,?,?,?) ra c0599ae800000030 sp 0 sz 0
> >> _vm_map_lock_read+40 (?,?,?,?) ra c0599b1800000018 sp 0 sz 0
> >> useracc+80 (?,?,?,?) ra c0599b3000000028 sp 0 sz 0
> >> 802a7dc4+dc (?,?,?,?) ra c0599b5800000040 sp 0 sz 0
> >> trap+e6c (?,?,?,?) ra c0599b98000000b8 sp 0 sz 0
> >> MipsKernGenException+134 (ffff,4,806089b0,0) ra c0599c50000000c8 sp
> >> 100000001 sz 1
> >> hostap_newstate+358 (?,?,?,?) ra c0599d1800000038 sp 0 sz 0
> >> ath_newstate+2c0 (?,?,?,?) ra c0599d5000000058 sp 0 sz 0
> >> ieee80211_newstate_cb+20c (?,?,?,?) ra c0599da800000040 sp 0 sz 0
> >> 801630c8+e8 (?,?,?,?) ra c0599de800000038 sp 0 sz 0
> >> taskqueue_thread_loop+8c (?,?,?,?) ra c0599e2000000038 sp 0 sz 0
> >> fork_exit+b0 (?,?,?,?) ra c0599e5800000028 sp 0 sz 0
> >> fork_trampoline+10 (?,?,?,?) ra c0599e8000000000 sp 0 sz 0
> >> pid 0
> >> Trap cause = 4 (address error (load or I-fetch) - kernel mode)
> >> [ thread pid 0 tid 100043 ]
> >> Stopped at      hostap_newstate+0x358:  lw      v0,0(a0)
> >> db>
> >>
> >
> >This looks like a new thing. I build an image from yesterday's tree for
> >my
> >TPlink and I did not see this.
>
> The 1043ND? All times I try to compile it says too big to fit the image.
>
> I will try it again.
>

We reduced things we stuff into the image. Its smaller now. It should build
fine with latest -head.

Cheers,
Hiren