Dlink DIR-825 B1 trial

Nenhum_de_Nos matheus at eternamente.info
Sat Sep 28 20:17:14 UTC 2013


On Sat, September 28, 2013 16:03, Nenhum_de_Nos wrote:
>
> On Wed, September 25, 2013 11:52, hiren panchasara wrote:
>> On Sep 25, 2013 4:25 AM, "Nenhum_de_Nos" <matheus at eternamente.info> wrote:
>>>
>>>
>>> On Fri, September 20, 2013 13:46, Adrian Chadd wrote:
>>> > .. can you repeat this with i386? The amd64 crowd may just assume
>> there's
>>> > much, much more minimum RAM available.
>>> >
>>> > I have the 10-ALPHA1 i386 ISO image waiting for a test install on
>>> > virtualbox; it'll happen over the weekend.
>>> >
>>> >
>>> > -adrian
>>>
>>> Hi guys,
>>>
>>> back to testing.
>>>
>>> I changed the line Hiren said, and now I am compiling it again. Using the
>> same code of that time.
>>> Better to update do today head ?
>> Better to test with the same code where you were seeing reproducible
>> problem. So that you can verify if the change I suggested is fixing it.
>
> hiren and all others,
>
> it is a complex task to make it have ssh/sshd/scp ?
>
> I have all time to make my modifications, and copy all stuff by hand :(
>
> # pwd
> /etc/cfg
> # ls
> hostapd.wlan0.conf      manifest
> hostapd.wlan1.conf      rc.conf
>
> this is all I need so far. I found that in build/files mfsroot gets files for it. But is there a
> way to make it look for in a place for each device ? I will test both 1043ND and 825, so if one
> messes the other, problem :)
>
> it is build already, just saving cfg to test it.
>
> thanks,
>
> matheus

same outcome:

th1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
wlan0: Ethernet address: 20:11:91:53:59:44
wlan1: Ethernet address: 59:44:91:53:20:11
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
bridge0: Ethernet address: 5e:35:c9:37:f6:d1
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
wlan1: start 60 second CAC timer on channel 52 (5260 MHz)
# wlan1: CAC timer on channel 52 (5260 MHz) expired; no radar detected
wlan1: ieee80211_new_state_locked: pending CAC -> RUN transition lost
lock order reversal: (sleepable after non-sleepable)
 1st 0xc70a3014 ath1_com_lock (ath1_com_lock) @
/root/work/freebsd/head/src/sys/modules/wlan/../../net80211/ieee80211_scan.c:686
 2nd 0x8036dff8 user map (user map) @ /root/work/freebsd/head/src/sys/vm/vm_glue.c:168
KDB: stack backtrace:
db_trace_thread+30 (?,?,?,?) ra c059989000000018 sp 0 sz 0
db_trace_self+1c (?,?,?,?) ra c05998a800000018 sp 0 sz 0
8007ad18+34 (?,?,?,?) ra c05998c0000001a0 sp 0 sz 0
kdb_backtrace+44 (?,?,?,?) ra c0599a6000000018 sp 0 sz 0
801704b8+34 (?,?,?,?) ra c0599a7800000020 sp 0 sz 0
witness_checkorder+b0c (?,?,802f97d4,a8) ra c0599a9800000050 sp 0 sz 1
_sx_slock+c0 (?,?,?,?) ra c0599ae800000030 sp 0 sz 0
_vm_map_lock_read+40 (?,?,?,?) ra c0599b1800000018 sp 0 sz 0
useracc+80 (?,?,?,?) ra c0599b3000000028 sp 0 sz 0
802a7dc4+dc (?,?,?,?) ra c0599b5800000040 sp 0 sz 0
trap+e6c (?,?,?,?) ra c0599b98000000b8 sp 0 sz 0
MipsKernGenException+134 (ffff,4,806089b0,0) ra c0599c50000000c8 sp 100000001 sz 1
hostap_newstate+358 (?,?,?,?) ra c0599d1800000038 sp 0 sz 0
ath_newstate+2c0 (?,?,?,?) ra c0599d5000000058 sp 0 sz 0
ieee80211_newstate_cb+20c (?,?,?,?) ra c0599da800000040 sp 0 sz 0
801630c8+e8 (?,?,?,?) ra c0599de800000038 sp 0 sz 0
taskqueue_thread_loop+8c (?,?,?,?) ra c0599e2000000038 sp 0 sz 0
fork_exit+b0 (?,?,?,?) ra c0599e5800000028 sp 0 sz 0
fork_trampoline+10 (?,?,?,?) ra c0599e8000000000 sp 0 sz 0
pid 0
Trap cause = 4 (address error (load or I-fetch) - kernel mode)
[ thread pid 0 tid 100043 ]
Stopped at      hostap_newstate+0x358:  lw      v0,0(a0)
db>

att,

matheus

>> Thanks for testing,
>> Hiren
>>>
>>> thanks,
>>>
>>> matheus
>>>
>>> --
>>> We will call you Cygnus,
>>> The God of balance you shall be
>>>
>>> A: Because it messes up the order in which people normally read text.
>>> Q: Why is top-posting such a bad thing?
>>>
>>> http://en.wikipedia.org/wiki/Posting_style
>>> _______________________________________________
>>> freebsd-embedded at freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-embedded
>>> To unsubscribe, send any mail to "freebsd-embedded-unsubscribe at freebsd.org
>> "
>>
>
>
> --
> We will call you Cygnus,
> The God of balance you shall be
>
> A: Because it messes up the order in which people normally read text.
> Q: Why is top-posting such a bad thing?
>
> http://en.wikipedia.org/wiki/Posting_style
> _______________________________________________
> freebsd-embedded at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-embedded
> To unsubscribe, send any mail to "freebsd-embedded-unsubscribe at freebsd.org"
>


-- 
We will call you Cygnus,
The God of balance you shall be

A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?

http://en.wikipedia.org/wiki/Posting_style


More information about the freebsd-embedded mailing list