Buffalo Airstation build support [update]

[Adrian Chadd]

Hm, can you use a static GEOM config to stripe them?



-adrian


On 9 September 2013 12:50, Sean Bruno <sean_bruno at yahoo.com> wrote:

> On Fri, 2013-09-06 at 12:13 -0700, Sean Bruno wrote:
>
> >
> > Implement support for Buffalo, "OpenWRT Friendly" Atheros Mips 24k
> > board
> > in the wifi builder.
> >
> > I'm still working on the kernconf, but the wifi builder support will
> > create and image called /tftpboot/wzr300hp-tftp.bin that is accepted
> > by
> > the router when pushed in via tftp and uboot following the
> > instructions
> > at:
> >
> http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h#oem.installation.using.the.tftp.method
> >
> >
>
> Thanks to Hiren doing the Picostation work, this Buffalo is now running!
>
> I'm going through the GPIO pins today, if I don't get any other
> outstanding issues.
>
> Item1:  UBoot is not giving me a functional rootfs partition.  I
> emulated the OpenWRT behavior to get it working.
>
> Item2:  there are 2 16M Flash devices.  Linux seems to concatenate them
> into one device.  I'm looking at spi(4) to see if it has that type of
> capabilities.
>
> Item3:  Unable to cfg_save. I don't think I have the cfg part mapped
> correctly:
>
> dd: /dev/map/cfg: Input/output error
> 0+1 records in
> 0+0 records out
> 0 bytes transferred in 0.250469 secs (0 bytes/sec)
>
> New kerconf:
> http://people.freebsd.org/~sbruno/WZR-300HP
>
> New kernconf.hints
> http://people.freebsd.org/~sbruno/WZR-300HP.hints
>
> dmesg:
> http://people.freebsd.org/~sbruno/buffalo_wzr_300hp_dmesg.txt
>
> FreeBSD Wifi Builder Diffs:
> http://people.freebsd.org/~sbruno/buffalo_airstation_support.txt
>