DIR-825B1 iicbus thing

[Sean Bruno]

On Fri, 2013-09-06 at 16:26 -0300, Luiz Otavio O Souza wrote:
>         
>         I've looked at your changes and found this:
>         +# GPIO I2C bus
>         +hint.gpioiic.0.at="gpiobus0"
>         +hint.gpioiic.0.pins=0x00a0
> 
> 
> Humm and 0x00a0 also seems wrong for DIR825: 
> +# Pin 5  - WPS (LED blue)     --> works
> +# Pin 6  - RTL8366RB switch data line
> +# Pin 7  - Planet (LED orange)--> works
> +# Pin 8  - RTL8366RB switch clock line
>  If i'm not mistaken the correct mask is 0x140 (for pin 6 and pin 8)
> and then set the correct pin index for sda and scl. 
> 
> 

I don't come up with 0x140 for bit 6 and bit 8 being set, I get 0xa0.
setting 0x140 would enable bit 7 and 9.  Right?

Sean
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: This is a digitally signed message part
URL: <http://lists.freebsd.org/pipermail/freebsd-embedded/attachments/20130907/bc4616cb/attachment.sig>