DIR-825B1 iicbus thing

[Sean Bruno]

On Fri, 2013-09-06 at 11:29 -0700, Adrian Chadd wrote:
> please port it? :-P
> 
> 
> 
Exactly my thought.

Sean


> 
> -adrian
> 
> 
> On 6 September 2013 11:18, Sean Bruno <sean_bruno at yahoo.com> wrote:
>         I've almost got a functional set of gpio pin hints setup now.
>          I seem to
>         have an unsupported device on the iicbus, probably the realtek
>         switch
>         thing?
>         
>         
>         iicbb0: <I2C bit-banging driver> on gpioiic0
>         iicbus0: <Philips I2C bus> on iicbb0 master-only
>         iicbus0: <unknown card> at addr 0xa8
>         iic0: <I2C generic I/O> on iicbus0
>         
>         The DIR-825B1 seems to have a "rtl8366s" ethernet switch.
>          That needs to
>         be ported to FreeBSD.  OpenWRT seems to have a driver for it:
>         https://dev.openwrt.org/browser/trunk/target/linux/generic/files/drivers/net/phy/rtl8366s.c
>         
>         Sean
> 
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: This is a digitally signed message part
URL: <http://lists.freebsd.org/pipermail/freebsd-embedded/attachments/20130906/4646018e/attachment.sig>