Making Picostation m2HP work

[Adrian Chadd]

cool.

So step #1 - what kind of SoC is it (7241) and wifi (ar9280) ?

The SoC dictates which base config we "copy" when we build the kernel.

The important bits for these SoCs are:

* which SoC
* for AR91xx/AR71xx - which ethernet switch and how it's wired up; the
AR933x and AR724x have an internet switch so there's only one config
* how much RAM
* what's the flash layout - important for generating the image and
populating the hints table with the flash layout

But let's focus on getting a kernel netbooting first..



-adrian

On 12 July 2013 13:50, hiren panchasara <hiren.panchasara at gmail.com> wrote:
> http://www.ubnt.com/picostationm
>
> Here is how it looks on boot:
>
>
> U-Boot 1.1.4.2-s564 (Jul 19 2012 - 10:41:56)
>
> Board: Ubiquiti Networks XM board (rev 1.0 e302)
> DRAM:  32 MB
> Flash:  8 MB
> PCIe WLAN Module found (#1).
> Net:   eth0, eth1
> Hit any key to stop autoboot:  0
> ## Booting image at 9f050000 ...
>    Image Name:   MIPS OpenWrt Linux-3.3.8
>    Created:      2013-05-31  19:12:55 UTC
>    Image Type:   MIPS Linux Kernel Image (lzma compressed)
>    Data Size:    924122 Bytes = 902.5 kB
>    Load Address: 80060000
>    Entry Point:  80060000
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... OK
>
> Starting kernel ...
> <skip>
>
> Dropping to uboot:
>
> U-Boot 1.1.4.2-s564 (Jul 19 2012 - 10:41:56)
>
> Board: Ubiquiti Networks XM board (rev 1.0 e302)
> DRAM:  32 MB
> Flash:  8 MB
> PCIe WLAN Module found (#1).
> Net:   eth0, eth1
> Hit any key to stop autoboot:  0
> ar7240> printenv
> bootdelay=1
> baudrate=115200
> ethaddr=00:15:6d:0d:00:00
> mtdids=nor0=ar7240-nor0
> partition=nor0,0
> mtddevnum=0
> mtddevname=u-boot
> filesize=10000
> fileaddr=81000000
> serverip=192.168.1.254
> ethact=eth0
> mtdparts=mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),5760k(rootfs),256k(cfg),64k(EEPROM)
> bootcmd=bootm 0x9f050000
> bootargs=console=tty0 root=31:03 rootfstype=squashfs init=/init
> ipaddr=192.168.1.20
> stdin=serial
> stdout=serial
> stderr=serial
>
> Environment size: 452/65532 bytes
> ar7240>
>
> Currently trying to build image with Adrian's
>
> http://freebsd-wifi-build.googlecode.com/svn/trunk/ to put on the board.
>
> Now, Adrian is going to guide me from here :-)
>
> Thanks,
> Hiren
> _______________________________________________
> freebsd-embedded at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-embedded
> To unsubscribe, send any mail to "freebsd-embedded-unsubscribe at freebsd.org"