Making Picostation m2HP work

[hiren panchasara]

On Wed, Aug 28, 2013 at 3:33 PM, Adrian Chadd <adrian at freebsd.org> wrote:

> Yes and I have no idea what regdomain that is. It's not in the atheros
> reference code, our driver or the linux code.
>
> So I'm stumped.
>
> Just override it with 0x0 for now and see if it attaches. I'll hunt down a
> contact at ubiquiti to figure this out.
>

Yes, that hack worked. :-)

Things seem to work now.

 http://bpaste.net/show/127295/ - patch to add kernconf and hint file.
(All of these changes have been done by loos@)

Let me know.

Thanks,
Hiren

>
>
> -adrian
>
>
>
> On 28 August 2013 15:25, hiren panchasara <hiren.panchasara at gmail.com>wrote:
>
>>
>>
>>
>> On Wed, Aug 28, 2013 at 2:52 PM, hiren panchasara <
>> hiren.panchasara at gmail.com> wrote:
>>
>>>
>>>
>>>> Alright. I was not loading if_ath_pci and that was the reason.
>>>> (Thanks to Sean for yelling at me from across the isle).
>>>>
>>>> But now, it fails at:
>>>>
>>>> ath0: <Atheros 9280> at device 0.0 on pci0
>>>> ath0: ath_pci_attach: EEPROM firmware @ 0x8046c000
>>>> [ath]: default pwr offset: -5 dBm != EEPROM pwr offset: 0 dBm; curves
>>>> will be adjusted.
>>>> ath0: ath_getchannels: unable to collect channel list from hal, status
>>>> 12
>>>> device_attach: ath0 attach returned 22
>>>>
>>>
>>> Turning on debugging:
>>>
>>>  # sysctl hw.ath.hal.debug=25600000000
>>> hw.ath.hal.debug: 0 -> 2147483647
>>>
>>>
>>> # kldload if_ath_pci
>>> ath0: <Atheros 9280> mem 0x10000000-0x1000ffff irq 0 at device 0.0 on
>>> pci0
>>>
>>> ath0: ath_pci_attach: EEPROM firmware @ 0x8046c000
>>> ar9280Attach: sc 0xc090d000 st 0x803006b4 sh 0xb0000000
>>> ar5416SetReset Applying descriptor swap
>>> ar5416SetPowerMode: AWAKE -> AWAKE (set chip )
>>> ar9280Attach: ID 0x802ff VERSION 0x2 TYPE 0x0 REVISION 0x2
>>> ath_hal_v14EepromAttach Eeprom Version 14.22
>>> v14EepromReadCTLInfo Numctls = 11
>>> ar5416SetPowerMode: AWAKE -> AWAKE (set chip )
>>> ar9280RfAttach: attach AR9280 radio
>>> [ath]: default pwr offset: -5 dBm != EEPROM pwr offset: 0 dBm; curves
>>> will be adjusted.
>>> enableAniMIBCounters: Enable mib counters: OfdmPhyErrBase 0xbffe0c
>>> cckPhyErrBase 0xbfff38
>>> ar9280Attach: return
>>> getchannels: cc 0 regDmn 0xf0 mode 0xffffff ecm
>>> isEepromValid: invalid regulatory domain/country code 0x2a
>>>
>> Adrian:
>>
>> Do we need to update hal regdomain entries with country code  0x2a?
>>
>> cheers,
>> Hiren
>>
>>  getregstate: invalid EEPROM contents
>>> ath0: ath_getchannels: unable to collect channel list from hal, status 12
>>> ar5416Detach:
>>> ar5416SetPowerMode: AWAKE -> AWAKE (set chip )
>>> Detaching Ani
>>> Disable MIB counters
>>> ar5416SetPowerMode: AWAKE -> AWAKE (set chip )
>>> ar5416SetReset Applying descriptor swap
>>> ar5416SetPowerMode: AWAKE -> FULL-SLEEP (set chip )
>>>
>>> device_attach: ath0 attach returned 22
>>>
>>>
>>> cheers,
>>> Hiren
>>>
>>
>>
>