TL-WR1043: switch

[Stefan Bethke]

Am 30.11.2011 um 12:05 schrieb Stefan Bethke:

> Either I'm doing something wrong, or the RTL8366 is working a lot differently from the datasheet. 

The datasheet I found is for the RTL8366, while the TL-WR1043ND uses a RTL8366RB.  While they seem to share quite a bit of the general architecture, the register map differs.  (There's also a RTL8366S.)

The best source on registers and their function then would be the OpenWrt source.
https://dev.openwrt.org/browser/trunk/target/linux/generic/files/drivers/net/phy/

rtl8366_smi.c is the bitbanging interface, while rtl8366rb.c contains the actual configuration functions.


Stefan

-- 
Stefan Bethke <stb at lassitu.de>   Fon +49 151 14070811