Can't boot NanoBSD on an Alix board

[Lyle Scott III]

and how might i do that on my flash card?  I read a little about boot0cfg
(man pages) and see the option -o packet  .. is this what i need?
how would i go about setting this in my flashcard that is mounted in another
freebsd system?

i read that packet mode == LBA mode BIOS setting?  is this true?
(http://lists.freebsd.org/pipermail/freebsd-current/2004-January/018907.html
)
if so, LBA does not work either.  The same result happens.

i nudge in the right direction would be much appreciated :)


On Dec 8, 2007 10:48 PM, M. Warner Losh <imp at bsdimp.com> wrote:

> In message: <5a1835cd0712081917i17f55b5cy59b396cb1cd7f4da at mail.gmail.com>
>            "Lyle Scott III" <portcitycs at gmail.com> writes:
> : ok, i just upgraded the BIOS and  now it hands after choosing 1 for the
> : bootloader:
> :
> : 640 KB Base Memory
> : 261120 KB Extended Memory
> :
> : 01F0 Master 848A SanDisk SDCFB-512
> : Phys C/H/S 993/16/63 Log C/H/S 993/16/63
> :
> : 1   FreeBSD
> :
> : Default: 1
> : [FREEZE]
>
> Try using the packet mode of boot0
>
> Warner
>



-- 
Lyle Scott, III
http://www.lylescott.ws