[patch] Re: Fwd: thinkpad and synaptics igor: fixed whitespace

[Bas Smeelen]

On 12/19/12 18:34, Edward wrote:
> On 12/20/12 1:02 AM, Bas Smeelen wrote:
>> Thanks! Do you have a working mouse in X when you plugin one via usb?
>> Can synaptics and usb mouse be active at simultaneously in X?
> Yes, there's a working Logitech USB optical mouse working before and
> after making touchpad works with synaptics driver. Both touchpad and USB
> mouse works simultaneously in X.

Very nice, thanks!
It is working for me also, I made a rather stupid mistake, the touchpad 
was disabled and I had to enable it with Fn + F7 key :)


>
>> I'm trying to get it to work on my laptop acer aspire 3682-150 but
>> cannot get it to work.
>> moused_enable="YES" is not in /etc/rc.conf but it still gets started
>> through hal I guess.
>> When I kill those processes (below), still no joy with the touchpad in X.
>> Also the mouse does not work in X when moused is not running.
>>
>> 2116 ??  I     0:00.03 hald-addon-mouse-sysmouse: /dev/psm0
>> (hald-addon-mouse-sy)
>> 2132 ??  I     0:00.04 hald-addon-mouse-sysmouse: /dev/ums0
>> (hald-addon-mouse-sy)
>> 2151 ??  Is    0:00.00 /usr/sbin/moused -p /dev/psm0 -t auto
>>
>> I must be doing something wrong.
>> sysctl's for synaptics are all there.
>> xorg.conf is in place with the right entries.
>> no moused_enable="YES" in /etc/rc.conf
>> in /etc/default/rc.conf moused_enable="NO"
> I suppose when setting hw.psm.synaptics_support="1" would make moused run.
>
> For your reference, here's what I've done:
> - put this into /boot/loader/conf and then reboot the machine:
> 	hw.psm.synaptics_support="1"
>
> - put these into /etc/X11/xorg.conf:
> 	Section "InputDevice"
> 	             Identifier  "Touchpad0"
> 	           Driver      "synaptics"
> 	           Option      "Protocol" "psm"
> 	            Option      "Device" "/dev/psm0"
> 	EndSection
>
> - and append these into "ServerLayout" section of /etc/X11/xorg.conf:
> 	InputDevice    "Touchpad0" "SendCoreEvents"
>
> - comment out moused_enable="YES" in /etc/rc.conf
>
> Hope this help.