Sb0200 Sound card! Please update the hardware and FreeBSD manual.

Sat Jul 23 03:11:59 UTC 2011

The SB0200 is not supported on FreeBSD as of me writing this email.

SB0200 is a sound blaster live 5.1! 24bit OEM sound card, which was specifically designed for Dell computer systems.
Although my research indicated it was one of the 24bit cards, I cannot confirm this. I can confirm that it will not work with snd_emu10kx or the snd_emu10k1
The chipset is a emu10k1x. I could not locate any windows drivers, and according to the net the only source for the windows drivers is from a Dell installation CD. The installation CD could be a Dell Demsion 4550, as Dell provides an update driver patch for the SB0200 on that system.

Again this email is ment to give a move to update the FreeBSD manual to reflect the fact that SB0200 is unsupported.

Below is the dmesg on my system:

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-RELEASE-p6 #7: Fri Jul 22 18:12:38 EDT 2011
root at .gateway.2wire.net:/usr/obj/usr/src/sys/dove i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz (2660.00-MHz 686-class CPU)
Origin = "GenuineIntel"  Id = 0x106e5  Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Cores per package: 8
Logical CPUs per core: 2
real memory  = 3178758144 (3031 MB)
avail memory = 3096457216 (2953 MB)
ACPI APIC Table: <DELL   FX09    >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  2
cpu2 (AP): APIC ID:  4
cpu3 (AP): APIC ID:  6
ioapic0: Changing APIC ID to 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL FX09   > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bdf00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce 310> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
pci1: <multimedia, HDA> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 8.0 (no driver attached)
pci0: <base peripheral> at device 8.1 (no driver attached)
pci0: <base peripheral> at device 8.2 (no driver attached)
pci0: <base peripheral> at device 8.3 (no driver attached)
pci0: <base peripheral> at device 16.0 (no driver attached)
pci0: <base peripheral> at device 16.1 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9ffc000-0xf9ffc3ff irq 16 at device 26.0 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb0: EHCI version 1.0
usb0: <EHCI (generic) USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhub1: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on uhub0
uhub1: single transaction translator
uhub1: 6 ports with 6 removable, self powered
ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 3> on uhub1
kbd2 at ukbd0
uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 3> on uhub1
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/27.30, addr 4> on uhub1
ums0: 8 buttons and Z dir.
umass0: <JMicron USB to ATA/ATAPI bridge, class 0/0, rev 2.00/1.00, addr 5> on uhub1
umass1: <JMicron USB to ATA/ATAPI bridge, class 0/0, rev 2.00/1.00, addr 6> on uhub1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM57780 A1, ASIC rev. 0x57780001> mem 0xfbff0000-0xfbffffff irq 17 at device 0.0 on pci3
miibus0: <MII bus> on bge0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: a4:ba:db:e7:bc:a2
bge0: [FILTER]
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf9ffa000-0xf9ffa3ff irq 23 at device 29.0 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb1: EHCI version 1.0
usb1: <EHCI (generic) USB 2.0 controller> on ehci1
usb1: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub2: 2 ports with 2 removable, self powered
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on uhub2
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
umass2: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on uhub3
umass3: <SanDisk Cruzer, class 0/0, rev 2.00/1.00, addr 4> on uhub3
uhid1: <vendor 0x0810 Twin USB Joystick, class 0/0, rev 1.00/1.06, addr 5> on uhub3
umass4: <SanDisk Cruzer, class 0/0, rev 2.00/1.00, addr 6> on uhub3
ulpt0: <HP Deskjet 1000 J110 series, class 0/0, rev 2.00/1.00, addr 7> on uhub3
ulpt0: using bi-directional mode
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <multimedia, audio> at device 1.0 (no driver attached)
pci4: <input device> at device 1.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8 SATA300 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc41f mem 0xf9ff8000-0xf9ff87ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.30 controller with 6 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: executing CLO failed
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: port not implemented
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 14
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 14
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pmtimer0 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: 476940MB <WDC WD5000AAKS-75V0A0 05.01D05> at ata2-master SATA300
acd0: DVDR <HL-DT-ST DVD+/-RW GH50N/B103> at ata3-master SATA150
ad10: 76293MB <Seagate ST380013AS 8.12> at ata5-master SATA150
(probe2:umass-sim2:2:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe2:umass-sim2:2:0:0): CAM Status: SCSI Status Error
(probe2:umass-sim2:2:0:0): SCSI Status: Check Condition
(probe2:umass-sim2:2:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(probe2:umass-sim2:2:0:0): Medium not present
(probe2:umass-sim2:2:0:0): Unretryable error
(probe2:umass-sim2:2:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 
(probe2:umass-sim2:2:0:1): CAM Status: SCSI Status Error
(probe2:umass-sim2:2:0:1): SCSI Status: Check Condition
(probe2:umass-sim2:2:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(probe2:umass-sim2:2:0:1): Medium not present
(probe2:umass-sim2:2:0:1): Unretryable error
(probe0:umass-sim2:2:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0 
(probe0:umass-sim2:2:0:2): CAM Status: SCSI Status Error
(probe0:umass-sim2:2:0:2): SCSI Status: Check Condition
(probe0:umass-sim2:2:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim2:2:0:2): Medium not present
(probe0:umass-sim2:2:0:2): Unretryable error
(probe0:umass-sim2:2:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0 
(probe0:umass-sim2:2:0:3): CAM Status: SCSI Status Error
(probe0:umass-sim2:2:0:3): SCSI Status: Check Condition
(probe0:umass-sim2:2:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim2:2:0:3): Medium not present
(probe0:umass-sim2:2:0:3): Unretryable error
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Maxtor 7 H500F0 > Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers
da1: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Maxtor 6 Y080L0 > Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 76293MB (156250000 512 byte sectors: 255H 63S/T 9726C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
da7 at umass-sim4 bus 4 target 0 lun 0
da7: <SanDisk Cruzer 1.00> Removable Direct Access SCSI-2 device 
da7: 40.000MB/s transfers
da7: 3827MB (7837696 512 byte sectors: 255H 63S/T 487C)
da6 at umass-sim3 bus 3 target 0 lun 0
da6: <SanDisk Cruzer 1.02> Removable Direct Access SCSI-2 device 
da6: 40.000MB/s transfers
da6: 3815MB (7813120 512 byte sectors: 255H 63S/T 486C)
da2 at umass-sim2 bus 2 target 0 lun 0
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device 
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim2 bus 2 target 0 lun 1
da3: <Generic- Compact Flash 1.01> Removable Direct Access SCSI-0 device 
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da4 at umass-sim2 bus 2 target 0 lun 2
da4: <Generic- SM/xD-Picture 1.02> Removable Direct Access SCSI-0 device 
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
da5 at umass-sim2 bus 2 target 0 lun 3
da5: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI-0 device 
da5: 40.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/da0s1a
NVRM: Xid (0000:01:00): 57, Failed shmoo sddr3 link training

End of Message!