sane configuration in Freebsd 7

[Marc Fonvieille]

On Tue, Sep 09, 2008 at 10:48:47AM -0400, Geoffrey wrote:
>  	/dev/uscanner0 was not being created in my installation.  This
> was the source of my grief.  That said the kernel somewhat saw it:
> 
> Sep  8 13:25:41 burp kernel: device_attach: uscanner0 attach
> returned 6
> Sep  8 13:26:27 burp kernel: ugen0: at uhub0 port 3 (addr 3)
> disconnected
> Sep  8 13:26:27 burp kernel: ugen0: detached
> Sep  8 13:26:33 burp kernel: uscanner0: at uhub0 port 2 (addr 2)
> disconnected
> Sep  8 13:26:38 burp root: Unknown USB device: vendor 0x05d8 product
> 0x4002 bus uhub0
> Sep  8 13:26:38 burp kernel: uscanner0: <vendor 0x05d8 product 0x4002,
> class 255/255, rev 1.10/1.00, addr 2> on uhub0
> Sep  8 13:26:38 burp kernel: uscanner0: bulk-in and/or bulk-out endpoint
> not found
> 
>  	From the documentation there appear to be conflicts in vendor
> and device ids and if you check these against usbdevs, usbdevs will see
> this device and vendor as something quite different from what they are.
> That said the kernel is not using usbdevs at this point.  The man page
> sane-usb explains the workaround for this.
>

What kind of scanner are you using?  Is your scanner listed in
uscanner(4) manual page?

>From a quick glance, your scanner is just not supported (maybe cause of
lack of USB IDs definition in /src/sys/dev/usb/usbdevs) by uscanner(4).
I can be wrong.  You should talk with people from freebsd-usb mailing
list since I doubt it's a doc related issue.

-- 
Marc