Kernel panicking in 6.2 and 7-CURRENT -- interrupt issues

[youshi10 at u.washington.edu]

On Tue, 29 May 2007 youshi10 at u.washington.edu wrote:

> Hello,
>     I'm trying to install 7-CURRENT on my desktop, locally instead of on a 
> virtual machine, and I'm running into an issue where the kernel almost always 
> panics on boot with my motherboard (ASUS P5N-SLI E), due to some sort of 
> interrupt assignment / probing issues.
>
> Observations:
>     1. 7-CURRENT (built) never properly detects the interrupts on the system.
>     2. 7-CURRENT (May ISO snapshot) doesn't properly detect my USB keyboard, 
> but boots and runs sysinstall.
>     3. 6.2 RELEASE panics if I don't boot FreeBSD up into "safe mode", due to 
> an issue with the ohci driver (I think the error message had something to deal 
> with device adding / enumeration and not being able to find a memory / 
> interrupt address).
>
>     First off, if I could get some of the command line arguments to pass to 
> the kernel to emulate safe-mode, that would be much appreciated. Second off, if 
> anybody has any ideas on how to debug this issue, I'll go off and try to 
> determine what the cause is. If it's anything like it was before (clean out 
> /usr/obj, rebuild), I'll be ok. Otherwise, I'll have to purchase more parts and 
> build another dedicated FreeBSD system :(..
>
> Thanks,
> -Garrett

Sorry for cross-posting so much, but this information is relevant to all of the mailing lists included.

Ok I "solved" my problem, to a certain extent.

Basically the ASUS P5N-E SLI motherboard (nVidia chipset) isn't bootable with FreeBSD 6.2 RELEASE without going into SAFE MODE (panics after ohci_add_done looking for a non-existent memory address, if the USB controller is enabled in the BIOS with "Legacy Mode", i.e. USB Keyboard compatible), and isn't compatible with FreeBSD 7 at all (kernel can't map IRQs properly on up-to-date CURRENT and panics in kernel mode during boot).

Strangely enough the 7-CURRENT snapshot ISOs work, but then again it doesn't setup the OHCI and USB keyboard stuff properly, and I can't get any sort of input from my keyboard, obviously.

The ASUS P5B-DLX motherboard (Intel chipset) is compatible with FreeBSD 6.2 and 7 though, without any hacks.

Maybe someone should update some documentation on the release notes page for supported hardware?

Thanks,
-Garrett

PS Please CC me in any communication as I'm not subscribed to doc@, stable@, or usb at .