docs/52514: Handbook: new chapter about Bluetooth
Pav Lucistnik
pav at oook.cz
Wed May 21 06:30:03 UTC 2003
>Number: 52514
>Category: docs
>Synopsis: Handbook: new chapter about Bluetooth
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-doc
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: doc-bug
>Submitter-Id: current-users
>Arrival-Date: Tue May 20 23:30:00 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator: Pav Lucistnik
>Release: FreeBSD 5.1-BETA i386
>Organization:
>Environment:
System: FreeBSD pav.oook.cz 5.1-BETA FreeBSD 5.1-BETA #1: Tue May 20 21:30:57 CEST 2003 root at pav.oook.cz:/usr/obj/usr/src/sys/PAV i386
>Description:
This is new chapter for Handbook, covering usage of The Bluetooth stack
on coming 5.1-RELEASE. It's based on my Bluetooth on FreeBSD webpage.
It was reviewed and approved by Maksim Yevmenkin, author of Bluetooth
code. Then it was review by Christian Brueffer (brueffer@).
We'd like to get a review by at least one docproj elder before brueffer
commits it.
Another question is where this should go. brueffer@ suggests after
Wireless Networking chapter, I suggest putting it after IPv6 as
a last chapter of Advanced networking.
Apply to /usr/doc/en_US.ISO8859-1/books/handbook/advanced-networking
>How-To-Repeat:
>Fix:
--- chapter.sgml.orig Tue May 20 21:11:44 2003
+++ chapter.sgml Tue May 20 23:15:03 2003
@@ -6687,6 +6687,388 @@
support AAAA records.</para>
</sect2>
</sect1>
+
+ <sect1 id="network-bluetooth">
+ <sect1info>
+ <authorgroup>
+ <author>
+ <firstname>Pav</firstname>
+ <surname>Lucistnik</surname>
+ <contrib>Written by </contrib>
+ <affiliation>
+ <address><email>pav at oook.cz</email></address>
+ </affiliation>
+ </author>
+ </authorgroup>
+ </sect1info>
+ <title>Bluetooth</title>
+
+ <sect2>
+ <title>Introduction</title>
+ <para>Bluetooth is a wireless technology for creating personal networks
+ operating in the 2.4 GHz unlicensed band, with a range of 10 meters.
+ Networks are usually formed ad-hoc from portable devices like mobile
+ phones, handhelds and laptops. Unlike the other popular wireless
+ technology, Wi-Fi, Bluetooth offers higher level service profiles,
+ e.g. FTP-like file servers, file pushing, voice transport, serial
+ line emulation and more.</para>
+
+ <para>The Bluetooth stack in FreeBSD is implemented using Netgraph.
+ A Broad variety of USB dongles is supported by the &man.ng.ubt.4; driver.
+ The 3Com PC Card 3CRWB60-A is supported by the &man.ng.bt3c.4; driver.
+ Serial and UART based Bluetooth devices are supported via
+ &man.ng.h4.4; and &man.hcseriald.8;. This chapter describes using
+ a USB Bluetooth dongle. Bluetooth support is available only on
+ FreeBSD 5.0 and newer systems.</para>
+ </sect2>
+
+ <sect2>
+ <title>Plugging in the Device</title>
+ <para>Device drivers are by default available as kernel modules.
+ Before attaching a device, you need to load the driver into the
+ kernel:</para>
+
+ <screen>&prompt.root; <userinput>kldload ng_ubt</userinput></screen>
+
+ <para>If the Bluetooth device is present in the system during system
+ startup, load the module from <filename>/boot/loader.conf</filename>:</para>
+
+ <programlisting>ng_ubt_load="YES"</programlisting>
+
+ <para>Plug in your USB dongle. Similar output will appear on the console
+ (or in syslog):</para>
+
+ <screen>ubt0: vendor 0x0a12 product 0x0001, rev 1.10/5.25, addr 2
+ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
+ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3;
+ wMaxPacketSize=49; nframes=6, buffer size=294</screen>
+
+ <para>Copy <filename>/usr/src/share/examples/netgraph/bluetooth/rc.bluetooth</filename>
+ to some convenient place, like <filename>/etc/rc.bluetooth</filename>.
+ This script is used to start and stop the Bluetooth stack. It is a good idea
+ to stop the stack before unplugging the device, but it is not (usually)
+ fatal. When starting the stack, you will receive output similar to this:</para>
+
+ <screen>&prompt.root; <userinput>/etc/rc.bluetooth start ubt0</userinput>
+BD_ADDR: 00:02:72:00:d4:1a
+Features: 0xff 0xff 0xf 00 00 00 00 00
+<3-Slot> <5-Slot> <Encryption> <Slot offset>
+<Timing accuracy> <Switch> <Hold mode> <Sniff mode>
+<Park mode> <RSSI> <Channel quality> <SCO link>
+<HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD>
+<Paging scheme> <Power control> <Transparent SCO data>
+Max. ACL packet size: 192 bytes
+Number of ACL packets: 8
+Max. SCO packet size: 64 bytes
+Number of SCO packets: 8</screen>
+
+ </sect2>
+
+ <sect2>
+ <title>HCI and Inquiry</title>
+
+ <para>Now it is time to discover some nearby bluetooth devices.
+ Discovering devices and many other interesting tasks is done with
+ the &man.hccontrol.8; utility. You will receive a list of discoverable
+ devices in a few seconds:</para>
+
+ <screen>&prompt.user; <userinput>hccontrol -n ubt0hci inquiry</userinput>
+Inquiry result, num_responses=1
+Inquiry result #0
+ BD_ADDR: 00:80:37:29:19:a4
+ Page Scan Rep. Mode: 0x1
+ Page Scan Period Mode: 00
+ Page Scan Mode: 00
+ Class: 52:02:04
+ Clock offset: 0x78ef
+Inquiry complete. Status: No error [00]</screen>
+
+ <para>BD_ADDR is the unique address of a bluetooth device, similar to MAC
+ addresses of network cards. This address is needed for further
+ communication with a device. Let us try to read the device's name:</para>
+
+ <screen>&prompt.user; <userinput>hccontrol -n ubt0hci remote_name_request 00:80:37:29:19:a4 0 0 0</userinput>
+BD_ADDR: 00:80:37:29:19:a4
+Name: Pav's T39</screen>
+
+ <para>If you perform a discovery on a different bluetooth device, it will find
+ your computer as <quote>your.host.name (ubt0)</quote>.</para>
+
+ <para>You can list active baseband connections:</para>
+
+ <screen>&prompt.user; <userinput>hccontrol -n ubt0hci read_connection_list</userinput>
+Remote BD_ADDR Handle Type Mode Role Encrypt Pending Queue State
+00:80:37:29:19:a4 41 ACL 0 MAST NONE 0 0 OPEN</screen>
+
+ <para>Handle is useful for manually disconnecting a connection:</para>
+
+ <screen>&prompt.root; <userinput>hccontrol -n ubt0hci disconnect 41</userinput>
+Connection handle: 41
+Reason: Connection terminated by local host [0x16]</screen>
+
+ <para>Refer to <command>hccontrol help</command> for a complete listing of
+ available commands. Note that the majority of commands does not require
+ superuser privileges.</para>
+
+ </sect2>
+
+ <sect2>
+ <title>L2CAP</title>
+
+ <para>L2CAP is a higher level of connection in Bluetooth standards.
+ A useful command is &man.l2ping.8;, which can be used to ping
+ other devices. Some devices might not return all of the data
+ send to them, so <emphasis>0 bytes</emphasis> as in this example
+ is a normal state.</para>
+
+ <screen>&prompt.root; <userinput>l2ping -a 00:80:37:29:19:a4</userinput>
+0 bytes from 0:80:37:29:19:a4 seq_no=0 time=48.633 ms result=0
+0 bytes from 0:80:37:29:19:a4 seq_no=1 time=37.551 ms result=0
+0 bytes from 0:80:37:29:19:a4 seq_no=2 time=28.324 ms result=0
+0 bytes from 0:80:37:29:19:a4 seq_no=3 time=46.150 ms result=0</screen>
+
+ <para>The &man.l2control.8; utility is used to configure L2CAP nodes
+ and read their state. This example shows file transfer to a Palm
+ handheld:</para>
+
+ <screen>&prompt.user; <userinput>l2control -a 00:02:72:00:d4:1a read_channel_list</userinput>
+L2CAP channels:
+Remote BD_ADDR SCID/ DCID PSM IMTU/ OMTU State
+00:07:e0:00:0b:ca 66/ 64 3 132/ 672 OPEN
+&prompt.user; <userinput>l2control -a 00:02:72:00:d4:1a read_connection_list</userinput>
+L2CAP connections:
+Remote BD_ADDR Handle Flags Pending State
+00:07:e0:00:0b:ca 41 O 0 OPEN</screen>
+
+ <para>Another diagnostic tool is &man.btsockstat.1;. It does a similar
+ job as &man.netstat.1; does, but for Bluetooth sockets, logical
+ connections on top of baseband connections. The example output shows
+ the same connection as l2control above:</para>
+
+ <screen>&prompt.user; <userinput>btsockstat</userinput>
+Active L2CAP sockets
+PCB Recv-Q Send-Q Local address/PSM Foreign address CID State
+c2afe900 0 0 00:02:72:00:d4:1a/3 00:07:e0:00:0b:ca 66 OPEN
+Active RFCOMM sessions
+L2PCB PCB Flag MTU Out-Q DLCs State
+c2afe900 c2b53380 1 127 0 Yes OPEN
+Active RFCOMM sockets
+PCB Recv-Q Send-Q Local address Foreign address Chan DLCI State
+c2e8bc80 0 250 00:02:72:00:d4:1a 00:07:e0:00:0b:ca 3 6 OPEN</screen>
+
+ </sect2>
+
+ <sect2>
+ <title>Pairing of Devices</title>
+
+ <para>By default, Bluetooth communication is not authorized and any device
+ can talk to any other device. Some devices, like mobile phones, require
+ authentication for some functionality, like Internet connections. This
+ is done with PIN numbers - you enter the same (up to 16 digits long)
+ number on both devices. This operation is called <emphasis>pairing</emphasis>.
+ The daemon that answers pairing requests is &man.hcsecd.8;. Copy
+ <filename>/usr/src/usr.sbin/bluetooth/hcsecd/hcsecd.conf</filename>
+ to <filename>/usr/local/etc</filename> and edit it. The following is an
+ example section for a mobile phone, with the PIN arbitrarily set to 1234:</para>
+
+ <programlisting>device {
+ bdaddr 00:80:37:29:19:a4;
+ name "Pav's T39";
+ key nokey;
+ pin "1234";
+}</programlisting>
+
+ <para>You can choose any PIN you like. Note that some devices, like
+ headsets, have a fixed PIN built in. Start <command>hcsecd -d</command>.
+ The <option>-d</option> switch forces the daemon to stay in the
+ terminal and not fork to the background, so we can see what is happening.
+ Set the remote device to receive pairing and initiate the HCI connection
+ to the remote device. The remote device should say that pairing was
+ accepted, and let you enter the PIN. Enter the same PIN as you have in your
+ <filename>hcsecd.conf</filename>. Now your PC and remote device are paired.
+ Alternatively, you can initiate pairing on the remote device.
+ This will appear in the <command>hcsecd</command> output:</para>
+
+<programlisting>hcsecd[16484]: Got Link_Key_Request event from 'ubt0hci', remote bdaddr 0:80:37:29:19:a4
+hcsecd[16484]: Found matching entry, remote bdaddr 0:80:37:29:19:a4, name 'Pav's T39', link key doesn't exist
+hcsecd[16484]: Sending Link_Key_Negative_Reply to 'ubt0hci' for remote bdaddr 0:80:37:29:19:a4
+hcsecd[16484]: Got PIN_Code_Request event from 'ubt0hci', remote bdaddr 0:80:37:29:19:a4
+hcsecd[16484]: Found matching entry, remote bdaddr 0:80:37:29:19:a4, name 'Pav's T39', PIN code exists
+hcsecd[16484]: Sending PIN_Code_Reply to 'ubt0hci' for remote bdaddr 0:80:37:29:19:a4</programlisting>
+
+ </sect2>
+
+ <sect2>
+ <title>Service Discovery Protocol (SDP)</title>
+ <para>If you want to know which services a Bluetooth device offers, and
+ on which RFCOMM channels, build <application>libbluetooth</application>
+ and <application>sdp-1.0rc3</application> from <ulink
+ url="http://www.geocities.com/m_evmenkin/">Maksim Evmenkin's
+ snapshot</ulink>. Then, run <application>sdptool</application> and
+ observe (the output is snipped a bit, as this tool is quite talky):</para>
+
+ <screen>&prompt.root; <userinput>sdptool browse 00:80:37:29:19:a4</userinput>
+Browsing 00:80:37:29:19:A4 ...
+Service Name: Dial-up Networking
+Protocol Descriptor List:
+ "L2CAP" (0x0100)
+ "RFCOMM" (0x0003)
+ Channel: 1
+
+Service Name: Fax
+Protocol Descriptor List:
+ "L2CAP" (0x0100)
+ "RFCOMM" (0x0003)
+ Channel: 2
+
+Service Name: Voice gateway
+Service Class ID List:
+ "Headset Audio Gateway" (0x1112)
+ "Generic Audio" (0x1203)
+Protocol Descriptor List:
+ "L2CAP" (0x0100)
+ "RFCOMM" (0x0003)
+ Channel: 3
+</screen>
+
+ <para>... and so on. You will need the channel number later for using
+ a given service. Some devices do not support browsing, they return
+ an empty list, but you can try searching for a specific service.</para>
+
+ <screen>&prompt.root; <userinput>sdptool search --bdaddr 00:07:e0:00:0b:ca OPUSH</userinput></screen>
+
+ <para>Offering services on FreeBSD to other devices is done using the
+ <application>sdpd</application> server.</para>
+ <screen>&prompt.root; <userinput>sdpd</userinput></screen>
+
+ <para>Registering a given Bluetooth service to a RFCOMM channel number:</para>
+ <screen>&prompt.root; <userinput>sdptool add --channel=7 LAN</userinput></screen>
+
+ <para>Checking services offered by our computer:</para>
+ <screen>&prompt.root; <userinput>sdptool browse ff:ff:ff:00:00:00</userinput></screen>
+ </sect2>
+
+ <sect2>
+ <title>Dial-up Networking (DUN) and Local Area Network (LAN)</title>
+
+ <para>Bluetooth can be used for connecting to the Internet, either over
+ PPP (mobile phones) or the local network (access points). The Dial-up Networking
+ profile on FreeBSD is implemented with &man.ppp.8; and
+ &man.rfcomm.pppd.8;, a wrapper that converts RFCOMM Bluetooth connections
+ to something ppp can operate with. Create ppp labels in
+ <filename>/etc/ppp/ppp.conf</filename>, examples from the &man.rfcomm.pppd.8;
+ manual page can be used.</para>
+
+ <para>Connecting to the Internet through a mobile phone (DUN profile). First, find
+ out the correct RFCOMM channel on the remote device using
+ <application>sdptool</application>. Then, use &man.rfcomm.pppd.8;:</para>
+
+ <screen>&prompt.root; <userinput>rfcomm_pppd -a 00:80:37:29:19:a4 -c -C 1 -l rfcomm-dialup</userinput></screen>
+
+ <para>Running a Bluetooth access point on FreeBSD. First, register a
+ RFCOMM channel for LAN service on the local <application>sdpd</application>.
+ Then, start the ppp server. Use BD_ADDR of the local Bluetooth device and
+ the channel number registered with <application>sdpd</application>.</para>
+
+ <screen>&prompt.root; <userinput>rfcomm_pppd -a 00:02:72:00:d4:1a -s -C 7 -l rfcomm-server</userinput></screen>
+
+ </sect2>
+
+ <sect2>
+ <title>OBEX Push (OPUSH)</title>
+ <para>OBEX is a widely used protocol for simple file transfers between
+ mobile devices. It's main use is in infrared communication, where it is
+ used for generic file transfers between notebooks or Palm handhelds,
+ and for sending business cards or calendar entries between mobile
+ phones and other devices with PIM applications.</para>
+
+ <para>The OBEX client is implemented in the
+ <application>obexapp</application> utility from <ulink
+ url="http://www.geocities.com/m_evmenkin/">Maksim Evmenkin's
+ snapshot</ulink>. It needs the <application>openobex</application>
+ library from same package and the
+ <filename role="package">devel/glib12</filename> port. Note that
+ <application>obexapp</application> does not require root privileges
+ to operate.</para>
+
+ <para>OBEX client. First, find which channel on the remote device is IrMC
+ Synchronization or OBEX Object Push. After that, use
+ <application>obexapp</application>. Here is an example session where
+ we download a file (device info from a mobile phone) and send
+ a file (business card to the phone's directory):</para>
+
+ <screen>&prompt.user; <userinput>obexapp -a 00:80:37:29:19:a4 -C 10</userinput>
+obex> get
+get: remote file> telecom/devinfo.txt
+get: local file> devinfo-t39.txt
+Success, response: OK, Success (0x20)
+obex> put
+put: local file> new.vcf
+put: remote file> new.vcf
+Success, response: OK, Success (0x20)
+obex> di
+Success, response: OK, Success (0x20)</screen>
+
+ <para>OBEX server. First, register the OPUSH service with the local
+ <application>sdpd</application>. If OPUSH does not work,
+ you can try the FTRN service instead. Then, start the OBEX daemon
+ using the channel number registered with sdpd:</para>
+
+ <screen>&prompt.root; <userinput>obexapp -s -C 10</userinput></screen>
+
+ <para>Received files will appear in <filename>/var/spool/obex</filename>.
+ This can be overriden with the <option>-r</option> switch. Make sure
+ the directory exists, <application>obexapp</application> will not
+ create it. On a typical workstation with a single user it is useful
+ to set a default owner of received files. See obexapp(1)
+ for details.</para>
+
+ </sect2>
+
+ <sect2>
+ <title>Serial Port Profile (SP)</title>
+ <para>Bluetooth can be used to emulate serial port connections.
+ To connect to a remote device, first locate the RFCOMM channel with the
+ Serial Port profile. Then, start the Serial Port Profile Daemon
+ &man.rfcomm.sppd.1; with a free pseudo tty:</para>
+
+ <screen>&prompt.root; <userinput>rfcomm_sppd -a 00:07:E0:00:0B:CA -c 1 -t /dev/ttyp6</userinput>
+rfcomm_sppd[94692]: Starting on /dev/ttyp6...</screen>
+
+ <para>Now connect this pseudo tty to your actual terminal:</para>
+
+ <screen>&prompt.root; <userinput>cu -l ttyp6</userinput></screen>
+
+ </sect2>
+
+ <sect2>
+ <title>Troubleshooting</title>
+
+ <sect3>
+ <title>A remote device cannot connect to us</title>
+ <para>Some older devices do not support role switching. By default,
+ when FreeBSD is accepting a connection, it tries to switch roles
+ to become a master. Devices which do not support this will not
+ be able to connect. Role switching is performed when a connection
+ is being established, so we cannot ask the remote device if it does
+ support role switching. There is a driver option to disable role
+ switching on our side:</para>
+ <screen>&prompt.root; <userinput>hccontrol -n ubt0hci write_node_role_switch 0</userinput></screen>
+ </sect3>
+
+ <sect3>
+ <title>Something is going wrong, can I see what exactly is happening?</title>
+ <para>Yes, you can. Use the <application>hcidump</application> tool
+ from <ulink url="http://www.geocities.com/m_evmenkin/">Maksim Evmenkin's
+ snapshot</ulink>, which works much like &man.tcpdump.1;. You can
+ use it to display the content of Bluetooth packets on the terminal
+ and to record Bluetooth communication for later analyzation.</para>
+ </sect3>
+
+ </sect2>
+
+ </sect1>
+
</chapter>
<!--
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-doc
mailing list