FreeBSD 4.8 Hardware: SIS650/961 chipset supported

Erik Nørgaard norgaard at math.ku.dk
Mon Apr 14 15:52:26 UTC 2003


Hi,

I just wish to update you on hardware supported by FreeBSD 4.8. I have an
Asus M2400E notebook with a SIS650/961 integrated chipset, and installed
FreeBSD 4.8 without any trouble at all. I have included the dmesg after
first boot below.

The only thing that do not work is the power management support, but this
is hardly surprising since the bios has support for APCI while the
4.8-kernel only supports APM.

Regards, Erik Norgaard.

dmesg after first boot follows:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Wed Apr  9 17:15:08 CEST 2003
    root at cepheus.fs.dk:/usr/src/sys/compile/CEPHEUS
Timecounter "i8254"  frequency 1193182 Hz
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz (1792.73-MHz
686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7

Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT
,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 117415936 (114664K bytes)
avail memory = 108728320 (106180K bytes)
Preloaded elf kernel "kernel" at 0xc055e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00f1d30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <SiS model 6325 VGA-compatible display device> at 0.0 irq 11
isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe7000000-0xe7000fff irq 11 at device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 11 at device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA100 controller> port 0xb800-0xb80f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <SiS 7012> port 0xa400-0xa47f,0xa800-0xa8ff irq 11 at device 2.7 on pci0
pcm0: <SigmaTel STAC9721/9723 ac97 codec>
sis0: <SiS 900 10/100BaseTX> port 0xa000-0xa0ff mem 0xe6000000-0xe6000fff irq
11 at device 3.0 on pci0
sis0: Ethernet address: 00:0c:6e:0d:91:bb
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 11 at device 10.1 on pci0
pcic1: PCI Memory allocated: 0x88001000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci0: <unknown card> (vendor=0x1180, dev=0x0552) at 10.2 irq 11
pci0: <unknown card> (vendor=0x14f1, dev=0x2f00) at 12.0 irq 11
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pca0 at port 0x40 on isa0
ad0: 38154MB <IC25N040ATCS04-0> [77520/16/63] at ata0-master UDMA100
acd0: CD-RW <TOSHIBA DVD-ROM SD-R2312> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a

Please check http://www.telho.net/M2E/ for more details.


Strandboulevarden 75, 3. tv.    E-mail:    norgaard at math.ku.dk
DK-2100 Copenhagen E            Cell, dk:        +45 2849 3936
Denmark




More information about the freebsd-doc mailing list