Zpool doesn't boot anymore after FreeBSD 12.1
Andriy Gapon
avg at FreeBSD.org
Thu Oct 22 07:39:37 UTC 2020
On 21/10/2020 15:20, Cassiano Peixoto wrote:
> Hi there,
>
> Anyone can help please? I've many servers with this same issue. Thanks
Can you try to replace /boot/zfsloader with zfsloader from other FreeBSD versions?
E.g., 12.0, 12.2-RC, 11.4, recent snapshot of the CURRENT?
> On Fri, Oct 16, 2020 at 10:24 AM Cassiano Peixoto <peixotocassiano at gmail.com>
> wrote:
>
>> Hi there,
>>
>> I have a FreeBSD 12.1-STABLE running on VMWARE with one disk. Then I added two more disks to expand my pool. BTW I already did it many time with no issues.
>>
>> I ran:
>>
>> # zpool status
>> pool: zroot
>> state: ONLINE
>> status: Some supported features are not enabled on the pool. The pool can
>> still be used, but some features are unavailable.
>> action: Enable all features using 'zpool upgrade'. Once this is done,
>> the pool may no longer be accessible by software that does not support
>> the features. See zpool-features(7) for details.
>> scan: none requested
>> config:
>>
>> NAME STATE READ WRITE CKSUM
>> zroot ONLINE 0 0 0
>> gpt/disk0 ONLINE 0 0 0
>>
>> errors: No known data errors
>>
>> # zpool add -f zroot da1
>> # zpool add -f zroot da2
>> # zpool status
>> pool: zroot
>> state: ONLINE
>> scan: none requested
>> config:
>>
>> NAME STATE READ WRITE CKSUM
>> zroot ONLINE 0 0 0
>> gpt/disk0 ONLINE 0 0 0
>> da1 ONLINE 0 0 0
>> da2 ONLINE 0 0 0
>>
>> errors: No known data errors
>> # reboot
>>
>> Then my system doesn’t boot anymore, i got the following error:
>>
>> gptzfsboot: error 4 lba 2038346899
>> gptzfsboot: error 4 lba 1361327267
>> /boot/config: -Dh
>>
>> BTX loader 1.00 BTX version is 1.02
>> Consoles: internal video/keyboard serial port
>> BIOS drive A: is fd0
>> BIOS drive C: is disk0
>> BIOS drive D: is disk1
>> BIOS drive E: is disk2
>> BIOS drive F: is disk3
>> BIOS drive G: is disk4
>> BIOS drive H: is disk5
>> ZFS: i/o error - all block copies unavailable
>> ZFS: failed to read pool zroot directory object
>> BIOS 638kB/3143616kB available memory
>>
>> FreeBSD/x86 bootstrap loader, Revision 1.1
>> ERROR: cannot open /boot/lua/loader.lua: invalid argument.
>>
>> Type '?' for list of commands, 'help' for more datailed help.
>> OK
>>
>> I can import my pool with no problems using the lived, but I could not fix it.
>>
>> Seems a bug after 12.1-STABLE. Please, anyone can take a look ok that?
>>
>> Thanks.
>>
>>
>>
>>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>
More information about the freebsd-current
mailing list