Multiport serial card Exsys EX-44388, where are the devices ?

[Kurt Jaeger]

Hi!

> > none1 at pci0:7:4:0:       class=0x070002 card=0x000814a1 chip=0x000814a1
> > rev=0xb0 hdr=0x00
> >     vendor     = 'Systembase Co Ltd'
> >     class      = simple comms
> >     subclass   = UART
> >     bar   [10] = type I/O Port, range 32, base 0x1040, size 64, enabled
> >     bar   [14] = type I/O Port, range 32, base 0x1000, size 64, enabled
> >
> 
> This is the one you want. You'll need to add vendor 14a1 device 8 to the
> puc tables. Do you need help with this?

Yes, see my other post. The card is now detected, but the result is
still strange (uart2-9 is detected as 16750, why?) and the additional
uarts 10 to 13 are also detected, but by some other mechanism I don't
understand.

And all of them do not work with kermit 8-}

> It will be a bit tricky because
> each of these defines several ports, I think.
> 
> and:
> >
> > pcib7 at pci0:6:0:0:       class=0x060400 card=0x00000000 chip=0x10801b21
> > rev=0x04 hdr=0x01
> >     vendor     = 'ASMedia Technology Inc.'
> >     device     = 'ASM1083/1085 PCIe to PCI Bridge'
> >     class      = bridge
> >     subclass   = PCI-PCI
> >
> 
> This is something else.

It's the PCIe to PCI bridge on the card itself.

-- 
pi at opsec.eu            +49 171 3101372                    One year to go !