SG116j install crashed

[Marius Strobl]

On Sat, Jan 20, 2018 at 08:25:08PM +0900, KIRIYAMA Kazuhiko wrote:
> At Thu, 18 Jan 2018 15:35:41 +0900,
> my wrote:
> > 
> > Hi, all
> > 
> > I've bought Biccamera's original bland note PC (SG116j)
> > impulsively because of cheapness($1780). I've installed
> > 12.0-CURRENT(r327788) right away. Booted smoothly but set
> > loader conf "unset hint.uart.1.at" and configure disk with
> > 
> > mmcsd0		58 GB	GPT
> >   mmcsd0p1	200MB	efi
> >   mmcsd0p2	54 GB	freebsd-ufs	/
> >   mmcsd0p3	4.2 GB	freebsd-swap	none
> > 
> > But in "Tetching distribution files" of base.txz, crashed
> > with:
> > 
> > sdhci_acpi0-slot0: Controller timeout
> > sdhci_acpi0-slot0: ============== REGISTER DUMP ==============
> > sdhci_acpi0-slot0: Sys addr: 0x02158000 | Version:  0x00001002
> > sdhci_acpi0-slot0: Blk size: 0x00000200 | Blk cnt:  0x000000f8
> > sdhci_acpi0-slot0: Argument: 0x017f57e8 | Trn mode: 0x00000027
> > sdhci_acpi0-slot0: Present:  0x1fff0106 | Host ctl: 0x00001025
> > sdhci_acpi0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
> > sdhci_acpi0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
> > sdhci_acpi0-slot0: Timeout:  0x00000007 | Int stat: 0x00000001
> > sdhci_acpi0-slot0: Int enab: 0x05ff0033 | Sig enab: 0x05ff003a
> > sdhci_acpi0-slot0: AC12 err: 0x80000000 | Host ctl2:0x0000008b
> > sdhci_acpi0-slot0: Caps:     0x446cc8b2 | Caps2:    0x00000807
> > sdhci_acpi0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
> > sdhci_acpi0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
> > sdhci_acpi0-slot0: ===========================================
> > mmcsd0: Error indicated: 1 Timeout
> >   :
> > (snip)
> >   :
> > Stopped at     kdb_enter+0x3b: movq    $0,kdb_why
> > db>
> > 
> > Detail log has put in [1]. BTW I used [2] so all stuffs are
> > within it and it should not be fetched to internet.
> > 
> > Is there any idea to go forth?
> > 
> > Best regards.
> > 
> > [1] http://35.200.82.201/~kiri/freebsd/sg116j/crash_in_install.jpeg
> > [2] FreeBSD-12.0-CURRENT-amd64-20180110-r327788-memstick.img
> 
> I've got r328126 memstic and install with it, then all went
> to perfect! Thanx for FreeBSD-CURRENT team!

FYI, I believe that you had hit the bug fixed in r327924; sorry about
that.

Marius