SG116j install crashed
KIRIYAMA Kazuhiko
kiri at kx.openedu.org
Thu Jan 18 12:22:04 UTC 2018
At Thu, 18 Jan 2018 15:35:41 +0900,
私 wrote:
>
> Hi, all
>
> I've bought Biccamera's original bland note PC (SG116j)
> impulsively because of cheapness($1780). I've installed
> 12.0-CURRENT(r327788) right away. Booted smoothly but set
> loader conf "unset hint.uart.1.at" and configure disk with
>
> mmcsd0 58 GB GPT
> mmcsd0p1 200MB efi
> mmcsd0p2 54 GB freebsd-ufs /
> mmcsd0p3 4.2 GB freebsd-swap none
>
> But in "Tetching distribution files" of base.txz, crashed
> with:
>
> sdhci_acpi0-slot0: Controller timeout
> sdhci_acpi0-slot0: ============== REGISTER DUMP ==============
> sdhci_acpi0-slot0: Sys addr: 0x02158000 | Version: 0x00001002
> sdhci_acpi0-slot0: Blk size: 0x00000200 | Blk cnt: 0x000000f8
> sdhci_acpi0-slot0: Argument: 0x017f57e8 | Trn mode: 0x00000027
> sdhci_acpi0-slot0: Present: 0x1fff0106 | Host ctl: 0x00001025
> sdhci_acpi0-slot0: Power: 0x0000000b | Blk gap: 0x00000080
> sdhci_acpi0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007
> sdhci_acpi0-slot0: Timeout: 0x00000007 | Int stat: 0x00000001
> sdhci_acpi0-slot0: Int enab: 0x05ff0033 | Sig enab: 0x05ff003a
> sdhci_acpi0-slot0: AC12 err: 0x80000000 | Host ctl2:0x0000008b
> sdhci_acpi0-slot0: Caps: 0x446cc8b2 | Caps2: 0x00000807
> sdhci_acpi0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
> sdhci_acpi0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
> sdhci_acpi0-slot0: ===========================================
> mmcsd0: Error indicated: 1 Timeout
> :
> (snip)
> :
> Stopped at kdb_enter+0x3b: movq $0,kdb_why
> db>
Controller timeout seems to be somtimes occured in latest
eMMC devices. demsg shows this machine's eMMC is Intel Bay
Trail/Braswell eMMC 4.5/4.5.1 Controller as bellow:
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> iomem 0x9183a000-0x9183afff irq 45 on acpi0
mmc0: <MMC/SD bus> on sdhci_acpi0
sdhci_acpi1: <Intel Bay Trail/Braswell SDXC Controller> iomem 0x91836000-0x91836fff irq 47 on acpi0
mmc1: <MMC/SD bus> on sdhci_acpi1
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Is Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller
currently works on FreeBSD 12.0-CURRENT?
# Full dmesg up to [1]
# [1] http://35.200.82.201/~kiri/freebsd/sg116j/dmesg.boot
>
> Detail log has put in [1]. BTW I used [2] so all stuffs are
> within it and it should not be fetched to internet.
>
> Is there any idea to go forth?
>
> Best regards.
>
> [1] http://35.200.82.201/~kiri/freebsd/sg116j/crash_in_install.jpeg
> [2] FreeBSD-12.0-CURRENT-amd64-20180110-r327788-memstick.img
>
> ---
> KIRIYAMA Kazuhiko
>
---
KIRIYAMA Kazuhiko
More information about the freebsd-current
mailing list